Serious road riders put in serious miles. Most of those miles occur in the daytime, when bright ambient conditions mean you need huge lumens numbers to be seen by motorists. But there's no reason a super-bright taillight can't look the part on the fastest road bikes. You invest in the best road bike technology--you deserve an equally fast taillight. Packing a huge punch with 250 lumens, the Flux 250R taillight is visible at more than 1 mile (1.5 km) in the brightest daytime conditions. Here in Morgan Hill, California we get those conditions all the time, this is the taillight we made for ourselves, and for you. - Designed to fit round and D-shaped seatposts. - Disco Flash mode: 250 lumens for 8:00 hours - Eco Flash mode: 25 lumens for 60:00 hours - Hybrid spherical lens and Fresnel lens over three high-power LEDs to send lumens for mile, or kilometers. - IPX7 waterproof means this light will be there when you need it, even in the hardest rain. - Includes 3 different size EPDM o-rings to fit a wide variety of seatposts. 2 o-rings included per size for spares. - Massive 1000mAh battery recharges via included micro USB cable in 2:15 hours. - Overmolded bezel for excellent side visibility. - Power Flash mode: 250 lumens for 8:00 hours - Steady High mode: 100 lumens for 3:00 hours - Steady Low mode: 25 lumens for 12:00 hours - Three CREE XBD 901 LEDs for maximum brightness and efficiency.

Splitting the difference between the previous Flux 800 and 900, the Flux 850 gets the game-changing Mode Shift found on the Flux 1250. This means there are three steady modes, all using both the wide and spot beams. Go from Steady Low to Steady High in a single push, without cycling through a flash mode. Press-and-hold for two seconds and you get into the secondary modes: Steady Flash to be seen in busy urban environments, Flash Mode for endless runtime, and two Flashlight modes with 10 and 20 hours of runtime for hanging around the campsite, or when you forget to charge your light and need to conserve the last few percent of battery life to get home. IPX7 waterproof means this light can survive being submerged 1 meter deep for 30 minutes. No, it's not meant for scuba diving. But is can handle anything you can throw at it on two wheels. - Sculpted double beam pattern uses separate optics for wide and spot beams to put light where you need it and maximizes every lumen. The result is a beam pattern that torch-style lights can't touch. - 1x CREE XP-L High Intensity LED plus 1x CREE XP-G LED. - Quick-release bar mount works on 22.2, 25.4, and 31.8mm bars to put the light above, below, or in front the stem to clear cables and computer mounts. - Extra bright side lights to give you 180-degree visibility to other cyclists and motorists. - 2600mAh Li-ion internal battery is USB rechargeable via included micro USB cable. - Depending on mode, up to an additional three hours of super-low output are available when listed runtimes expire. Trust us, someday you'll need this. - Steady High mode: 850 lumens for 1:30 hours - Steady Medium mode: 450 lumens for 3:00 hours - Steady Low mode: 250 lumens for 6:00 hours - Press-and-hold to turn off, long press-and-hold to enter secondary modes. - Steady Flash mode: 300 + 200 lumens for 4:00 hours - Daytime Flash mode: 400 lumens for 20:00 hours - Very low mode: 100 lumens for 10:00 hours - Super low mode: 50 lumens for 20:00 hours - Extra-long press-and-hold to lockout light for travelling.

These rear rack-mounted adapters provide simple and secure mounting points for panniers like the Coolcave. The low mounting position opens the top rack platform for other accessories like the Rack Customization Kit or MIK adapter. *Third-party panniers not tested for guaranteed compatibility - Designed for frictionless compatibility with the Globe Haul ST and up to 2 pairs on Haul LT* - *Not compatible with Globe Pegs due to shared mounting location. - Accepts most standard bicycle panniers, such as the Specialized Coolcave. - Includes two pannier adapters (one for each side of the rack) and all required hardware. - 8kg (18lb) load capacity per side. - Additional tools required for rear installation (not included).

This plug-in throttle mounts next to your HMI on your Globe bike and allows you to motor up to 20mph without needing to pedal. Need to go faster? Pedal assist will still be there to give you a boost to 28mph after the throttle reaches its limit. The throttle’s extra burst of torque makes entering and exiting traffic safer and faster but still allows you to use pedal assist to increase efficiency and range. - Designed for frictionless compatibility with the Globe Haul ST and Haul LT. - Max throttle speed: 20mph. Does not affect pedal-assist performance or top speed. - Requires installation of the free Globe phone app to activate.

Tool-less, 3-position training wheel installation/removal system. - Closed-cell foam tires - Tubular steel arms - Compatible with 2013-present Hotrock 20-inch models only

This lock folds into a conveniently small package to fit perfectly on accessory mounts like the ones on your Globe fork legs or head tube*. The new Click Tight bracket makes for easy install and removal with the press of a button. The Kryptolok features a 6/10 security rating and is backed by Kryptonite's lifetime warranty and Anti-theft Protection offer. At 100cm long, you can easily lock around most racks and the large Globe tires. *For head tube mounting, two additional M5-.08 x 16mm bolts are required. (not included) - Includes 2 plastic mounting straps for attachment to frame tubes and bolts for attachment to fork legs - Does not include M5-.08 x 16mm bolts for attachment to the headtube. - 39.5" (100cm) length - 5mm Hardened steel links for moderate security lock ups - Durable rubber coating on links to protect the bike frame - Includes 2 keys and the Kryptonite Key Safe Program - Includes new Click Tight transport bracket - Eligible for the Kryptonite Anti-theft Protection Offer up to $1750

Our best-selling bottle, the Little Big Mouth 21oz Bottle takes a revolutionary design and shrinks it down a bit. It's conveniently shaped and absolutely leak-proof. It has a tight-sealing Big Mouth screw top that's ultra-wide for adding things like ice or your hydration powder of choice. This piece also provides an incredible level of water flow that's up to 50% greater than the competition. Meanwhile, we gave the bottle a flexible, ergonomic design that grips to cages and fits easily in the hand, while the bottle's construction is made from BPA-free plastic that's 100% FDA food-grade approved. - Tight-sealing Big Mouth screw top is wide enough for ice cubes and powder drink mix. Wide water channel delivers 50% greater flow than other leading bottles. Plus, improved functional outside grip. - Updated MoFlo cap retains the same mechanism and delivers great flow. It's now easier to clean with a flush top and improved grip. 100% leak-free. - Easy to grip and more flexible than the original Little Big Mouth. - Also available in 24oz Big Mouth option. - BPA-free plastic made from 100% FDA food-grade materials and printed with non-solvent base (UV cured), CPSC-approved ink, and materials.

- 15kg carrying capacity. - Folding design allows it to fold down to size of a pizza box. - Lightweight aluminum, 13mm rails. - Can carry any side pannier with hooks that fit 13mm rails or larger. - Additional platform on top allows for an extra bag.

The Purist Fixy Bottle features an amorphous silicon dioxide coating that's infused into the inner-wall of the bottle. Essentially, this forms a glass-like finish that provides a totally natural, and completely inert, solution to the problem of your drinks staining the bottle or leaving behind any residual aftertaste. This infusion also shields your fresh water from tasting like plastic on very hot days, making it akin to drinking straight from a sparkling clean glass. - Purist infusion shields the bottle from odor, stains, and mold to keep your water pure and your bottle clean. - Self-sealing Heart Valve™ delivers a high rate of flow with a 100% leak-proof design, even when the valve is open. - No push or pull is required to open and close the Heart Valve™. - Easy-to-clean mouthpiece - Ergonomic design of cap body provides easy grip. - Made from easy-to-squeeze LDPE material. - Clear viewing strip makes it easy to see the bottle's contents. - BPA-Free plastic is made from 100% FDA food-grade materials, and it's printed with non-solvent base (UV Cured), CPSC-approved ink and materials. - Available in 22oz and 26oz Purist Bottles.

Specialized's Purist Hydroflo MoFlo Bottle features an amorphous silicon dioxide coating that's infused into the inner-wall of the bottle. Essentially, this forms a glass-like finish that provides a totally natural, and completely inert, solution to the problem of your drinks staining the bottle or leaving behind any residual aftertaste. This infusion also shields your fresh water from tasting like plastic on very hot days, making it akin to drinking straight from a sparkling clean glass. The silicon dioxide coating is a mere 20 nanometers thick which, for comparison, is less than 5,000 times thinner than a human hair. Meanwhile, the shape of the bottle feels equally perfect both in the hand and in the cage. This version has Specialized's Hydroflo MoFlo cap and bottle shape. It features a self-a large screw top to accommodate ice and powder mixes. Additionally, Hydroflo features a new three-shape design that not only improves the actual handling of the bottle, but it also secures its position within your cage. They recommend a simple rinse and dry after use, but if you want to wash it, take care not to scratch the inner surface of the plastic. Alternatively, it'll be fine on the top rack of your machine. - Purist infusion shields the bottle form odor, stains, and mold to keep your water pure and your bottle clean. - Proprietary engineered resin delivers the most flexible bottle ever designed. - Ergonomic, three-sided design makes it easy to grip, and it's form fitting to the hand. - Large screw top design is leak-free and wide enough for ice cubes and scooping in powdered drink mix. - New MoFlo cap design features a wide water channel to deliver up to 50% greater flow than other leading bottles, plus it features an improved outside grip. - BPA-Free plastic is made from 100% FDA food- grade materials, and it's printed with non-solvent base (UV Cured), CPSC-approved ink and materials.

The Purist Hydroflo MoFlo Bottle features an amorphous silicon dioxide coating that's infused into the inner-wall of the bottle. Essentially, this forms a glass-like finish that provides a totally natural, and completely inert, solution to the problem of your drinks staining the bottle or leaving behind any residual aftertaste. This infusion also shields your fresh water from tasting like plastic on very hot days, making it akin to drinking straight from a sparkling clean glass. - Purist infusion shields the bottle from odor, stains, and mold to keep your water pure and your bottle clean. - Proprietary engineered resin delivers the most flexible bottle ever designed. - Ergonomic, three-sided design makes it easy to grip, and it's form fitting to the hand. - Large screw top design is leak-free and wide enough for ice cubes and scooping in powdered drink mix. - Updated MoFlo cap remains the same mechanism and deliver great flow. It's easier to clean with flush top and improved functional grip. 100% leak-free. - BPA-Free plastic is made from 100% FDA food-grade materials, and it's printed with non-solvent base (UV Cured), CPSC-approved ink and materials.

The Purist Hydroflo WaterGate Bottle features an amorphous silicon dioxide coating that's infused into the inner-wall of the bottle. Essentially, this forms a glass-like finish that provides a totally natural, and completely inert, solution to the problem of your drinks staining the bottle or leaving behind any residual aftertaste. This infusion also shields your fresh water from tasting like plastic on very hot days, making it akin to drinking straight from a sparkling clean glass. - Purist infusion shields the bottle form odor, stains, and mold to keep your water pure and your bottle clean. - Proprietary engineered resin delivers the most flexible bottle ever designed. - Ergonomic, three-sided design makes it easy to grip, and it's form fitting to the hand. - Simple hands-free open and close valve: Nothing to turn. - 100% leak-proof top locks down for transport or mixing powdered drinks. - Self-sealing Heart Valve delivers a high rate of flow with a 100% leak-proof design even when the valve is open. - Rubber over-molded on the outside of cap for an easy grip. - BPA-Free plastic is made from 100% FDA food-grade materials, and it's printed with non-solvent base (UV Cured), CPSC-approved ink and materials.

The all-new Purist Insulated features our Chromatek liner—a proprietary insulating barrier that lines the core to keep your liquids cold. Not only do your liquids stay cold, but new squeezable materials allow for unmatched flexibility, too. The Purist Insulated Chromatek bottles still feature an amorphous silicon dioxide coating that's infused into the inner wall of the bottle. Essentially, this forms a glass-like finish that provides a totally natural, and completely inert, solution to the problem of your drinks staining the bottle or leaving behind any residual aftertaste. This infusion also shields your fresh water from tasting like plastic on very hot days, making it akin to drinking straight from a sparkling clean glass. Finally, our Watergate cap features our Heart Valve that opens and closes—hands-free. - Purist infusion shields the bottle from odor, stains, and mold to keep your water pure and your bottle clean. - Chromatek liner keeps your liquids cold. - Updated materials make for unmatched squeezability. - Self-sealing Heart Valve delivers a high rate of flow with a 100% leak-proof design—even when the valve is open. - BPA-Free plastic is made from 100% FDA food- grade materials, and it's printed with non-solvent base (UV Cured), CPSC-approved ink and materials.

The Purist MoFlo Bottle features an amorphous silicon dioxide coating that's infused into the inner-wall of the bottle. Essentially, this forms a glass-like finish that provides a totally natural, and completely inert, solution to the problem of your drinks staining the bottle or leaving behind any residual aftertaste. This infusion also shields your fresh water from tasting like plastic on very hot days, making it akin to drinking straight from a sparkling clean glass. - Purist infusion shields the bottle from odor, stains, and mold to keep your water pure and your bottle clean. - Large screw top design is leak-free and wide enough for ice cubes and scooping in powdered drink mix. - Updated MoFlo cap retains the same mechanism and delivers great flow. It's now easier to clean with a flush top and improved grip. 100% leak-free. - Made from easy-to-squeeze LDPE material. - Clear viewing strip makes it easy to see the bottle's contents. - BPA-Free plastic is made from 100% FDA food-grade materials, and it's printed with non-solvent base (UV Cured), CPSC-approved ink, and materials. - Available in 22oz and 26oz Purist Bottles.

The Purist MoFlo Bottle features an amorphous silicon dioxide coating that's infused into the inner wall of the bottle. Essentially, this forms a glass-like finish that provides a totally natural, and completely inert, solution to the problem of your drinks staining the bottle or leaving behind any residual aftertaste. This infusion also shields your fresh water from tasting like plastic on very hot days, making it akin to drinking straight from a sparkling clean glass. - Purist infusion shields the bottle from odor, stains, and mold to keep your water pure and your bottle clean. - Large screw top design is leak-free and wide enough for ice cubes and scooping in powdered drink mix. - Updated MoFlo cap retains the same mechanism and delivers great flow. It's now easier to clean with a flush top and improved grip. - 100% leak-free. - Made from easy-to-squeeze LDPE material. - Clear viewing strip makes it easy to see the bottle's contents. - BPA-Free plastic is made from 100% FDA food-grade materials, and it's printed with non-solvent base (UV Cured), CPSC-approved ink and materials.

The Purist WaterGate Bottle features an amorphous silicon dioxide coating that's infused into the inner-wall of the bottle. Essentially, this forms a glass-like finish that provides a totally natural, and completely inert, solution to the problem of your drinks staining the bottle or leaving behind any residual aftertaste. This infusion also shields your fresh water from tasting like plastic on very hot days, making it akin to drinking straight from a sparkling clean glass. - Purist infusion shields the bottle from odor, stains, and mold to keep your water pure and your bottle clean. - Simple hands-free open and close valve: Nothing to turn. - 100% leak-proof top locks down for transport or mixing powdered drinks. - Self-sealing Heart Valve™ delivers a high rate of flow with a 100% leak-proof design—even when the valve is open. - Rubber over-molded on the outside of cap for easy, sure grip. - Made from easy-to-squeeze LDPE material. - Clear viewing strip makes it easy to see the bottle's contents. - BPA-Free plastic is made from 100% FDA food-grade materials, and it's printed with non-solvent base (UV Cured), CPSC-approved ink and materials. - Available in 22oz and 26oz Purist Bottles.

The Rib Cage II is not only a sleek, lightweight water bottle cage, but it's also been designed to be fast in the wind. Of course, it also performs its primary task of holding tight to bottles dutifully, so you won't be losing bottles when the road gets rough. - SWAT-compatible design allows for storage and tool integration. - Super-low bottle position improves the aerodynamic profile. - Tuned compression design provides a secure bottle retention with easy in-and-out accessibility. - Reinforced composite material improves durability without adding weight. - Sleek, minimalist design with razor-sharp graphics. - Accepts SWAT Cage Mount Road or MTB Tool. - Accepts MTB SWAT Box (when used on compatible frames). - Weight: 33g

So you like to keep your rig running minimalist but practical? The Road Bandit is the best of both worlds in terms of simplicity and utility for road riders. The patent-pending Road Tube Spool was integrated into the design, making it extremely user friendly. Its compact form bolts under your SWAT-compatible saddle and features a simple, Velcro strap and securely holds your tube, CO2, CO2 nozzle and tire lever (included). One rip of the strap and you're in, with everything you need to fix a flat when time is of the essence. - CO2 valve head and two-sided tire lever snap into place for compact and secure storage. - Fits up to 80mm-long tube valve stems. - Holds a single threaded 16g CO2 cartridge. - Patent-pending Tube Spool allows the spare tube to be rolled up while protecting valve stem from rubbing a hole through the rubber. - Tire lever and CO2 head included; tube and CO2 cartridge sold separately. - Tough, lightweight, water resistant Velcro strap. - Uniquely designed to bolt directly under a saddle with SWAT-compatible mounts.

Keep the road grime and water off your clothes with a durable fender set made specifically for the Roll. No-fuss installation means you can add them quickly and easily, so you're always ready to ride. - Valuable and durable plastic fender set for Roll. - Designed for 650b x 2.3" tires. - Stainless steel fender stays and hardware. - Rear fender supports Plug and Play frame mounting. - Front: 660mm / Rear: 1050mm

The new S-Works Carbon Rib Cage III keeps the 100% FACT carbon fiber construction of yesteryear, but it ups bottle retention for super rough roads. The split design also provides pre-load to hold bottles securely, while making bottle entry as easy as possible. - FACT carbon construction creates a splendid fusion of strength, optimal bottle retention, and light overall weight. - Super-low bottle position improves the aerodynamic profile. - Tuned compression design provides secure bottle retention with easy in-and-out accessibility. - Weight: 24g

The 100% FACT carbon fiber S-Works Carbon Zee Cage II is compatible with SWAT solutions for tool and storage integration. It also features a unique right-side loading design that allows you to easily manage bottles when space on the frame is limited, or for when you're down in the drops. - SWAT design allows for storage and tool integration. - FACT carbon construction creates a splendid fusion of strength and light overall weight. - Side-load design for easy in-and-out accessibility for frames with compact bottle mounting area. - Right-hand loading on the down tube—left-hand loading on the seat tube. - Accepts EMT Cage Mount MTB Tool. - Accepts MTB XC Box (when used on compatible frames). - Weight: 28g

Battery anxiety? Not with a Turbo SL. Our discreet and compact SL Range-Extender Battery provides up to 40 additional miles (64km) of mountain-flattening power. More range, more riding. - Only available for purchase at your local dealer. - 160Wh capacity delivers up to one additional hour of riding. - Compatible with Turbo SL Bikes. - Includes a 3 LED charge-level indicator. - SL Range Extender Cable 220mm ROAD 98920-5655 SOLD SEPARATELY. - SL Range Extender Cable 160mm MTB 98920-5650 SOLD SEPARATELY.

Replacement SWAT MTB Tool. - Made with hardened CRV steel bits with anti-rust coating and forged alloy frame. - Includes slotted screwdriver, 3, 4, 5, 6, and 8mm Allen keys, and T25 Torx. - Please note that this does not include a storage cradle to attach to a frame or cage.

Quickly charges your Specialized SL battery. - Custom Li-Ion battery charger for Specialized SL batteries. - 48V system - Compact and lightweight design. - Equipped with a custom plug and light indication of the charging status.

Bike to hike and back again has never been easier. Based on the iconic Fjallraven Verdag backpack, the Cave Pack has been shaped to nestle into the Coolcave like an arctic fox in its den. Lift the pack out of the Coolcave and sling it on your back using the padded shoulder straps. Equipped with a padded laptop compartment and large and small pockets, the Specialized/Fjällräven Cave Pack organizes and protects your most important belongings. - 20L capacity. - Easy-access pocket. - Fully padded laptop compartment. - Large front pocket. - Easy-carry handles. - Compatible with Coolcave pannier.

Built for those who simplify and go, the Cave Tote is our minimalist accessory for your Coolcave. A large main pocket lets you fill the tote with items big and small, perfect for trips to the supermarket, picnics, and everything in between. The tote lifts out of the Coolcave to bring with you into the store, gym, or wherever. - 20L capacity. - Double handles with adjustable shoulder strap. - Small interior zip pocket. - Expandable interior cinch closure. - Compatible with Coolcave pannier. - Large Specialized/Fjällräven logo print.

The Handlebar Bag provides easy-access storage and works just as well on urban missions as on gravel escapes. Slide it onto the handlebar frame and fasten it with straps (note that the handlebar frame is not included and must be bought separately for the handlebar bag to function on a bike). Should you not want to leave it on your bike, it detaches easily and you can carry it with the removable shoulder strap. Elastic mesh pockets on the top and sides for items you want close at hand. Two attachment points on the front for tent poles, accessories, or the Specialized/Fjällräven Snack Bag. Note: The lid and seams are not sealed, but the lining is waterproof, so the bag offers protection from the rain. Part of the Specialized/Fjällräven series for urban rides and bikepacking adventures. - Weather-resistant, semi-rigid design in Vinylon F with lining in 100% recycled nylon. - One-hand easy-opening closure with an elastic cord loop. - Mesh pockets on top and sides and zippered inside pockets. - Reflective logo increases your visibility in low-light conditions. - Volume- approx. 10 L - Material- Vinylon F (100% vinylal)

Versatile aluminum frame rack for transporting everything from postal packages to drybags or a tent on your bike. Attaches directly to the handlebar (fits handlebars with 31.8 mm diameter) and works with all types of bikes, except extreme downhill bikes. An anti-rotation guyline prevents the frame rack from tilting forward. Webbing straps to attach gear are not included. Part of the Specialized/Fjällräven series for urban rides and bikepacking adventures. - Light and strong aluminum construction. - Three under-rack accessory mounting holes for lights, cameras, etc. - Max load of 5kg. - Fits handlebars with 31.8 mm diameter and works with most types, including straight and drop models. - Compatible with Specialized's Future Shock suspension system. - Dimensions: 20 x 18 x 13 cm.

Designed to accommodate the more aerodynamic profile of aero bars and seatposts, the Stix Aero Strap mount gives you the ability to attach a Specialized Stix for day or night riding. - Stix light mount with longer, flexible silicone strap to fit Shiv and Venge seatposts, plus Aerofly handlebars.

Day or night, the Stix Elite headlight packs a powerful punch. Running in Steady-High mode at night, it delivers 100 lumens of focused, strong, and bright light to guide your way. It’s a true to-see-by headlight. During the day, your visibility and safety becomes its first priority. Running in Power Flash mode, this tiny package delivers 200 lumens-worth of, “see me now,” light, making it a beacon for all road users. And depending on the chosen mode, the Stix Elite will run for up to 112 hours, and it’s easily charged via built-in USB tab, which eliminates the need for a cable. - 12 to 200 lumens output - Spherical lens delivers a to-see-by beam pattern. Fresnel lenses for secondary LEDs provide wide angle visibility - 2.5- to 112-hour runtime - Charges in the USB port of any laptop or phone charger in two hours (no extra cables needed) - Flexible mounting system works with handlebars from 22.2mm up to 35mm in diameter - Six modes including: Steady High (100 lumens), Steady Low (38 lumens), Power Surge (97 lumens), Power Flash (200 lumens), Disco Flash (63 lumens), Eco Flash (12 lumens) - Red/Green battery charge level indicator - Additional mounting options available separately