Heading out after dark and need lights? Look no further than the Flash Pack. This combo kit includes the new Flash 300 headlight with our tried-and-true Flashback taillight. See where you are going, and be seen by motorists, all the while not breaking the bank. Whether you are an all-conditions commuter or a student riding across campus, the Flash Pack has got you covered. - Single-LED headlight oval beam pattern gives a perfect blend of spot and peripheral visibility. Single-LED taillight for rear visibility. - 700 + 200mAh rechargeable Li-ion batteries charge in 2:00 hours each with included micro USB cables. - Headlight installs in seconds with a silicone strap system. Just pull the strap under the handlebar and drop it into the slot on the light body. - Includes two different-sized straps to fit every round handlebar cockpit. (Flash headlights are not suitable for aero handlebars.) - Extra bright side lights to give you 180-degree visibility to other cyclists and motorists. - O-ring mount (extra o-ring included) fits all round seatposts. - IPX7 waterproof means these lights will be there when you need them, even in the hardest rain. - White Steady High mode: 300 lumens for 1:30 hours - White Steady Medium mode: 150 lumens for 3:00 hours - White Steady Low mode: 75 lumens for 6:00 hours - White Flash mode: 150 lumens for 12:00 hours - Red Steady mode: 10 lumens for 2:00 hours - Red Power Flash mode: 20 lumens for 4:00 hours - Red Disco Flash mode: 14 lumens for 6:00 hours - Red Eco Flash mode: 5 lumens for 20:00 hours

Put this little bright spot anywhere—your belt, your backpack, your seatpost—and ride on. The Flashback is your go-to savior, packing a mighty “I’m here!” punch to keep you visible on the streets. With its belt clip, you can literally clip it on just about anything, and its compact size makes it a total no-brainer for keeping your ride safe and your street-cred high. - Compact, bright, and waterproof. - Built-in fabric belt clip makes it a clip-anywhere taillight option (seatpost mount included). - Four operating modes: Steady (10 lumens), Power Flash (20 lumens), Disco Flash (14 lumens), Eco Flash (5 lumens). - 2- to 20-hour runtime, depending on mode. - Tested and approved for the following Specialized helmet models: Align, Ambush Comp, Chamonix, Propero II, Echelon II

The newest top-of-the-line Flux headlight continues the Flux tradition of optimal beam pattern, wide variety of mounting options, and super rugged construction. Compared to the Flux 1200, the Flux 1250 increases lumens and runtime, throws in the helmet and camera-style mounts, while dropping the price. BOOM! Mode Shift user interface gives you three steady modes for just the right mix of lumens and runtimes to match riding conditions. Press-and-hold to enter the secondary modes, where you will find a Steady Flash mode for increased visibility in urban conditions, a Flash mode for daytime use, and 10 and 20 hour flashlight modes for bikepacking conditions, or when you forget to recharge and need to maximize the last few percent of battery life. IPX7 waterproof means this light can survive being submerged 1 meter deep for 30 minutes. No, it's not meant for scuba diving. But is can handle anything you can throw at it on two wheels. - Sculpted double beam pattern uses separate optics for wide and spot beams to put light where you need it and maximizes every lumen. The result is a beam pattern that torch-style lights can't touch. - Latest CREE XP-L High Intensity LEDs combines XM-L level of output in a tighter 3.5mm package for maximum lumens with better beam pattern control. - Quick-release bar mount works on 22.2, 25.4, and 31.8mm bars to put the light above, below, or in front the stem to clear cables and computer mounts. - Also includes helmet mount and action camera style mount to give you every option to blow up the night. - Premium 3400mAh Li-ion internal battery is USB rechargeable via micro USB cable. - Depending on mode, up to an additional three hours of super-low output are available when listed runtimes expire. Trust us, someday you'll need this. - Steady High mode: 1250 lumens for 1:30 hours - Steady Medium mode: 600 lumens for 3:00 hours - Steady Low mode: 300 lumens for 6:00 hours - Press-and-hold to turn off, long press-and-hold to enter secondary modes. - Steady Flash mode: 300 + 300 lumens for 4:00 hours - Daytime Flash mode: 450 lumens for 20:00 hours - Very low mode: 120 lumens for 10:00 hours - Super low mode: 60 lumens for 20:00 hours - Extra-long press-and-hold to lockout light for travelling.

Serious road riders put in serious miles. Most of those miles occur in the daytime, when bright ambient conditions mean you need huge lumens numbers to be seen by motorists. But there's no reason a super-bright taillight can't look the part on the fastest road bikes. You invest in the best road bike technology--you deserve an equally fast taillight. Packing a huge punch with 250 lumens, the Flux 250R taillight is visible at more than 1 mile (1.5 km) in the brightest daytime conditions. Here in Morgan Hill, California we get those conditions all the time, this is the taillight we made for ourselves, and for you. - Designed to fit round and D-shaped seatposts. - Disco Flash mode: 250 lumens for 8:00 hours - Eco Flash mode: 25 lumens for 60:00 hours - Hybrid spherical lens and Fresnel lens over three high-power LEDs to send lumens for mile, or kilometers. - IPX7 waterproof means this light will be there when you need it, even in the hardest rain. - Includes 3 different size EPDM o-rings to fit a wide variety of seatposts. 2 o-rings included per size for spares. - Massive 1000mAh battery recharges via included micro USB cable in 2:15 hours. - Overmolded bezel for excellent side visibility. - Power Flash mode: 250 lumens for 8:00 hours - Steady High mode: 100 lumens for 3:00 hours - Steady Low mode: 25 lumens for 12:00 hours - Three CREE XBD 901 LEDs for maximum brightness and efficiency.

Splitting the difference between the previous Flux 800 and 900, the Flux 850 gets the game-changing Mode Shift found on the Flux 1250. This means there are three steady modes, all using both the wide and spot beams. Go from Steady Low to Steady High in a single push, without cycling through a flash mode. Press-and-hold for two seconds and you get into the secondary modes: Steady Flash to be seen in busy urban environments, Flash Mode for endless runtime, and two Flashlight modes with 10 and 20 hours of runtime for hanging around the campsite, or when you forget to charge your light and need to conserve the last few percent of battery life to get home. IPX7 waterproof means this light can survive being submerged 1 meter deep for 30 minutes. No, it's not meant for scuba diving. But is can handle anything you can throw at it on two wheels. - Sculpted double beam pattern uses separate optics for wide and spot beams to put light where you need it and maximizes every lumen. The result is a beam pattern that torch-style lights can't touch. - 1x CREE XP-L High Intensity LED plus 1x CREE XP-G LED. - Quick-release bar mount works on 22.2, 25.4, and 31.8mm bars to put the light above, below, or in front the stem to clear cables and computer mounts. - Extra bright side lights to give you 180-degree visibility to other cyclists and motorists. - 2600mAh Li-ion internal battery is USB rechargeable via included micro USB cable. - Depending on mode, up to an additional three hours of super-low output are available when listed runtimes expire. Trust us, someday you'll need this. - Steady High mode: 850 lumens for 1:30 hours - Steady Medium mode: 450 lumens for 3:00 hours - Steady Low mode: 250 lumens for 6:00 hours - Press-and-hold to turn off, long press-and-hold to enter secondary modes. - Steady Flash mode: 300 + 200 lumens for 4:00 hours - Daytime Flash mode: 400 lumens for 20:00 hours - Very low mode: 100 lumens for 10:00 hours - Super low mode: 50 lumens for 20:00 hours - Extra-long press-and-hold to lockout light for travelling.

These rear rack-mounted adapters provide simple and secure mounting points for panniers like the Coolcave. The low mounting position opens the top rack platform for other accessories like the Rack Customization Kit or MIK adapter. *Third-party panniers not tested for guaranteed compatibility - Designed for frictionless compatibility with the Globe Haul ST and up to 2 pairs on Haul LT* - *Not compatible with Globe Pegs due to shared mounting location. - Accepts most standard bicycle panniers, such as the Specialized Coolcave. - Includes two pannier adapters (one for each side of the rack) and all required hardware. - 8kg (18lb) load capacity per side. - Additional tools required for rear installation (not included).

This plug-in throttle mounts next to your HMI on your Globe bike and allows you to motor up to 20mph without needing to pedal. Need to go faster? Pedal assist will still be there to give you a boost to 28mph after the throttle reaches its limit. The throttle’s extra burst of torque makes entering and exiting traffic safer and faster but still allows you to use pedal assist to increase efficiency and range. - Designed for frictionless compatibility with the Globe Haul ST and Haul LT. - Max throttle speed: 20mph. Does not affect pedal-assist performance or top speed. - Requires installation of the free Globe phone app to activate.

Tool-less, 3-position training wheel installation/removal system. - Closed-cell foam tires - Tubular steel arms - Compatible with 2013-present Hotrock 20-inch models only

This lock folds into a conveniently small package to fit perfectly on accessory mounts like the ones on your Globe fork legs or head tube*. The new Click Tight bracket makes for easy install and removal with the press of a button. The Kryptolok features a 6/10 security rating and is backed by Kryptonite's lifetime warranty and Anti-theft Protection offer. At 100cm long, you can easily lock around most racks and the large Globe tires. *For head tube mounting, two additional M5-.08 x 16mm bolts are required. (not included) - Includes 2 plastic mounting straps for attachment to frame tubes and bolts for attachment to fork legs - Does not include M5-.08 x 16mm bolts for attachment to the headtube. - 39.5" (100cm) length - 5mm Hardened steel links for moderate security lock ups - Durable rubber coating on links to protect the bike frame - Includes 2 keys and the Kryptonite Key Safe Program - Includes new Click Tight transport bracket - Eligible for the Kryptonite Anti-theft Protection Offer up to $1750

Our best-selling bottle, the Little Big Mouth 21oz Bottle takes a revolutionary design and shrinks it down a bit. It's conveniently shaped and absolutely leak-proof. It has a tight-sealing Big Mouth screw top that's ultra-wide for adding things like ice or your hydration powder of choice. This piece also provides an incredible level of water flow that's up to 50% greater than the competition. Meanwhile, we gave the bottle a flexible, ergonomic design that grips to cages and fits easily in the hand, while the bottle's construction is made from BPA-free plastic that's 100% FDA food-grade approved. - Tight-sealing Big Mouth screw top is wide enough for ice cubes and powder drink mix. Wide water channel delivers 50% greater flow than other leading bottles. Plus, improved functional outside grip. - Updated MoFlo cap retains the same mechanism and delivers great flow. It's now easier to clean with a flush top and improved grip. 100% leak-free. - Easy to grip and more flexible than the original Little Big Mouth. - Also available in 24oz Big Mouth option. - BPA-free plastic made from 100% FDA food-grade materials and printed with non-solvent base (UV cured), CPSC-approved ink, and materials.

- 15kg carrying capacity. - Folding design allows it to fold down to size of a pizza box. - Lightweight aluminum, 13mm rails. - Can carry any side pannier with hooks that fit 13mm rails or larger. - Additional platform on top allows for an extra bag.

The Purist Fixy Bottle features an amorphous silicon dioxide coating that's infused into the inner-wall of the bottle. Essentially, this forms a glass-like finish that provides a totally natural, and completely inert, solution to the problem of your drinks staining the bottle or leaving behind any residual aftertaste. This infusion also shields your fresh water from tasting like plastic on very hot days, making it akin to drinking straight from a sparkling clean glass. - Purist infusion shields the bottle from odor, stains, and mold to keep your water pure and your bottle clean. - Self-sealing Heart Valve™ delivers a high rate of flow with a 100% leak-proof design, even when the valve is open. - No push or pull is required to open and close the Heart Valve™. - Easy-to-clean mouthpiece - Ergonomic design of cap body provides easy grip. - Made from easy-to-squeeze LDPE material. - Clear viewing strip makes it easy to see the bottle's contents. - BPA-Free plastic is made from 100% FDA food-grade materials, and it's printed with non-solvent base (UV Cured), CPSC-approved ink and materials. - Available in 22oz and 26oz Purist Bottles.

Specialized's Purist Hydroflo MoFlo Bottle features an amorphous silicon dioxide coating that's infused into the inner-wall of the bottle. Essentially, this forms a glass-like finish that provides a totally natural, and completely inert, solution to the problem of your drinks staining the bottle or leaving behind any residual aftertaste. This infusion also shields your fresh water from tasting like plastic on very hot days, making it akin to drinking straight from a sparkling clean glass. The silicon dioxide coating is a mere 20 nanometers thick which, for comparison, is less than 5,000 times thinner than a human hair. Meanwhile, the shape of the bottle feels equally perfect both in the hand and in the cage. This version has Specialized's Hydroflo MoFlo cap and bottle shape. It features a self-a large screw top to accommodate ice and powder mixes. Additionally, Hydroflo features a new three-shape design that not only improves the actual handling of the bottle, but it also secures its position within your cage. They recommend a simple rinse and dry after use, but if you want to wash it, take care not to scratch the inner surface of the plastic. Alternatively, it'll be fine on the top rack of your machine. - Purist infusion shields the bottle form odor, stains, and mold to keep your water pure and your bottle clean. - Proprietary engineered resin delivers the most flexible bottle ever designed. - Ergonomic, three-sided design makes it easy to grip, and it's form fitting to the hand. - Large screw top design is leak-free and wide enough for ice cubes and scooping in powdered drink mix. - New MoFlo cap design features a wide water channel to deliver up to 50% greater flow than other leading bottles, plus it features an improved outside grip. - BPA-Free plastic is made from 100% FDA food- grade materials, and it's printed with non-solvent base (UV Cured), CPSC-approved ink and materials.

The Purist Hydroflo MoFlo Bottle features an amorphous silicon dioxide coating that's infused into the inner-wall of the bottle. Essentially, this forms a glass-like finish that provides a totally natural, and completely inert, solution to the problem of your drinks staining the bottle or leaving behind any residual aftertaste. This infusion also shields your fresh water from tasting like plastic on very hot days, making it akin to drinking straight from a sparkling clean glass. - Purist infusion shields the bottle from odor, stains, and mold to keep your water pure and your bottle clean. - Proprietary engineered resin delivers the most flexible bottle ever designed. - Ergonomic, three-sided design makes it easy to grip, and it's form fitting to the hand. - Large screw top design is leak-free and wide enough for ice cubes and scooping in powdered drink mix. - Updated MoFlo cap remains the same mechanism and deliver great flow. It's easier to clean with flush top and improved functional grip. 100% leak-free. - BPA-Free plastic is made from 100% FDA food-grade materials, and it's printed with non-solvent base (UV Cured), CPSC-approved ink and materials.

The Purist Hydroflo WaterGate Bottle features an amorphous silicon dioxide coating that's infused into the inner-wall of the bottle. Essentially, this forms a glass-like finish that provides a totally natural, and completely inert, solution to the problem of your drinks staining the bottle or leaving behind any residual aftertaste. This infusion also shields your fresh water from tasting like plastic on very hot days, making it akin to drinking straight from a sparkling clean glass. - Purist infusion shields the bottle form odor, stains, and mold to keep your water pure and your bottle clean. - Proprietary engineered resin delivers the most flexible bottle ever designed. - Ergonomic, three-sided design makes it easy to grip, and it's form fitting to the hand. - Simple hands-free open and close valve: Nothing to turn. - 100% leak-proof top locks down for transport or mixing powdered drinks. - Self-sealing Heart Valve delivers a high rate of flow with a 100% leak-proof design even when the valve is open. - Rubber over-molded on the outside of cap for an easy grip. - BPA-Free plastic is made from 100% FDA food-grade materials, and it's printed with non-solvent base (UV Cured), CPSC-approved ink and materials.

The all-new Purist Insulated features our Chromatek liner—a proprietary insulating barrier that lines the core to keep your liquids cold. Not only do your liquids stay cold, but new squeezable materials allow for unmatched flexibility, too. The Purist Insulated Chromatek bottles still feature an amorphous silicon dioxide coating that's infused into the inner wall of the bottle. Essentially, this forms a glass-like finish that provides a totally natural, and completely inert, solution to the problem of your drinks staining the bottle or leaving behind any residual aftertaste. This infusion also shields your fresh water from tasting like plastic on very hot days, making it akin to drinking straight from a sparkling clean glass. Finally, our Watergate cap features our Heart Valve that opens and closes—hands-free. - Purist infusion shields the bottle from odor, stains, and mold to keep your water pure and your bottle clean. - Chromatek liner keeps your liquids cold. - Updated materials make for unmatched squeezability. - Self-sealing Heart Valve delivers a high rate of flow with a 100% leak-proof design—even when the valve is open. - BPA-Free plastic is made from 100% FDA food- grade materials, and it's printed with non-solvent base (UV Cured), CPSC-approved ink and materials.

The Purist MoFlo Bottle features an amorphous silicon dioxide coating that's infused into the inner-wall of the bottle. Essentially, this forms a glass-like finish that provides a totally natural, and completely inert, solution to the problem of your drinks staining the bottle or leaving behind any residual aftertaste. This infusion also shields your fresh water from tasting like plastic on very hot days, making it akin to drinking straight from a sparkling clean glass. - Purist infusion shields the bottle from odor, stains, and mold to keep your water pure and your bottle clean. - Large screw top design is leak-free and wide enough for ice cubes and scooping in powdered drink mix. - Updated MoFlo cap retains the same mechanism and delivers great flow. It's now easier to clean with a flush top and improved grip. 100% leak-free. - Made from easy-to-squeeze LDPE material. - Clear viewing strip makes it easy to see the bottle's contents. - BPA-Free plastic is made from 100% FDA food-grade materials, and it's printed with non-solvent base (UV Cured), CPSC-approved ink, and materials. - Available in 22oz and 26oz Purist Bottles.

The Purist MoFlo Bottle features an amorphous silicon dioxide coating that's infused into the inner wall of the bottle. Essentially, this forms a glass-like finish that provides a totally natural, and completely inert, solution to the problem of your drinks staining the bottle or leaving behind any residual aftertaste. This infusion also shields your fresh water from tasting like plastic on very hot days, making it akin to drinking straight from a sparkling clean glass. - Purist infusion shields the bottle from odor, stains, and mold to keep your water pure and your bottle clean. - Large screw top design is leak-free and wide enough for ice cubes and scooping in powdered drink mix. - Updated MoFlo cap retains the same mechanism and delivers great flow. It's now easier to clean with a flush top and improved grip. - 100% leak-free. - Made from easy-to-squeeze LDPE material. - Clear viewing strip makes it easy to see the bottle's contents. - BPA-Free plastic is made from 100% FDA food-grade materials, and it's printed with non-solvent base (UV Cured), CPSC-approved ink and materials.

The Purist WaterGate Bottle features an amorphous silicon dioxide coating that's infused into the inner-wall of the bottle. Essentially, this forms a glass-like finish that provides a totally natural, and completely inert, solution to the problem of your drinks staining the bottle or leaving behind any residual aftertaste. This infusion also shields your fresh water from tasting like plastic on very hot days, making it akin to drinking straight from a sparkling clean glass. - Purist infusion shields the bottle from odor, stains, and mold to keep your water pure and your bottle clean. - Simple hands-free open and close valve: Nothing to turn. - 100% leak-proof top locks down for transport or mixing powdered drinks. - Self-sealing Heart Valve™ delivers a high rate of flow with a 100% leak-proof design—even when the valve is open. - Rubber over-molded on the outside of cap for easy, sure grip. - Made from easy-to-squeeze LDPE material. - Clear viewing strip makes it easy to see the bottle's contents. - BPA-Free plastic is made from 100% FDA food-grade materials, and it's printed with non-solvent base (UV Cured), CPSC-approved ink and materials. - Available in 22oz and 26oz Purist Bottles.

The Rib Cage II is not only a sleek, lightweight water bottle cage, but it's also been designed to be fast in the wind. Of course, it also performs its primary task of holding tight to bottles dutifully, so you won't be losing bottles when the road gets rough. - SWAT-compatible design allows for storage and tool integration. - Super-low bottle position improves the aerodynamic profile. - Tuned compression design provides a secure bottle retention with easy in-and-out accessibility. - Reinforced composite material improves durability without adding weight. - Sleek, minimalist design with razor-sharp graphics. - Accepts SWAT Cage Mount Road or MTB Tool. - Accepts MTB SWAT Box (when used on compatible frames). - Weight: 33g

So you like to keep your rig running minimalist but practical? The Road Bandit is the best of both worlds in terms of simplicity and utility for road riders. The patent-pending Road Tube Spool was integrated into the design, making it extremely user friendly. Its compact form bolts under your SWAT-compatible saddle and features a simple, Velcro strap and securely holds your tube, CO2, CO2 nozzle and tire lever (included). One rip of the strap and you're in, with everything you need to fix a flat when time is of the essence. - CO2 valve head and two-sided tire lever snap into place for compact and secure storage. - Fits up to 80mm-long tube valve stems. - Holds a single threaded 16g CO2 cartridge. - Patent-pending Tube Spool allows the spare tube to be rolled up while protecting valve stem from rubbing a hole through the rubber. - Tire lever and CO2 head included; tube and CO2 cartridge sold separately. - Tough, lightweight, water resistant Velcro strap. - Uniquely designed to bolt directly under a saddle with SWAT-compatible mounts.

Keep the road grime and water off your clothes with a durable fender set made specifically for the Roll. No-fuss installation means you can add them quickly and easily, so you're always ready to ride. - Valuable and durable plastic fender set for Roll. - Designed for 650b x 2.3" tires. - Stainless steel fender stays and hardware. - Rear fender supports Plug and Play frame mounting. - Front: 660mm / Rear: 1050mm

The new S-Works Carbon Rib Cage III keeps the 100% FACT carbon fiber construction of yesteryear, but it ups bottle retention for super rough roads. The split design also provides pre-load to hold bottles securely, while making bottle entry as easy as possible. - FACT carbon construction creates a splendid fusion of strength, optimal bottle retention, and light overall weight. - Super-low bottle position improves the aerodynamic profile. - Tuned compression design provides secure bottle retention with easy in-and-out accessibility. - Weight: 24g

The 100% FACT carbon fiber S-Works Carbon Zee Cage II is compatible with SWAT solutions for tool and storage integration. It also features a unique right-side loading design that allows you to easily manage bottles when space on the frame is limited, or for when you're down in the drops. - SWAT design allows for storage and tool integration. - FACT carbon construction creates a splendid fusion of strength and light overall weight. - Side-load design for easy in-and-out accessibility for frames with compact bottle mounting area. - Right-hand loading on the down tube—left-hand loading on the seat tube. - Accepts EMT Cage Mount MTB Tool. - Accepts MTB XC Box (when used on compatible frames). - Weight: 28g

Battery anxiety? Not with a Turbo SL. Our discreet and compact SL Range-Extender Battery provides up to 40 additional miles (64km) of mountain-flattening power. More range, more riding. - Only available for purchase at your local dealer. - 160Wh capacity delivers up to one additional hour of riding. - Compatible with Turbo SL Bikes. - Includes a 3 LED charge-level indicator. - SL Range Extender Cable 220mm ROAD 98920-5655 SOLD SEPARATELY. - SL Range Extender Cable 160mm MTB 98920-5650 SOLD SEPARATELY.

Replacement SWAT MTB Tool. - Made with hardened CRV steel bits with anti-rust coating and forged alloy frame. - Includes slotted screwdriver, 3, 4, 5, 6, and 8mm Allen keys, and T25 Torx. - Please note that this does not include a storage cradle to attach to a frame or cage.

Quickly charges your Specialized SL battery. - Custom Li-Ion battery charger for Specialized SL batteries. - 48V system - Compact and lightweight design. - Equipped with a custom plug and light indication of the charging status.

Bike to hike and back again has never been easier. Based on the iconic Fjallraven Verdag backpack, the Cave Pack has been shaped to nestle into the Coolcave like an arctic fox in its den. Lift the pack out of the Coolcave and sling it on your back using the padded shoulder straps. Equipped with a padded laptop compartment and large and small pockets, the Specialized/Fjällräven Cave Pack organizes and protects your most important belongings. - 20L capacity. - Easy-access pocket. - Fully padded laptop compartment. - Large front pocket. - Easy-carry handles. - Compatible with Coolcave pannier.

Built for those who simplify and go, the Cave Tote is our minimalist accessory for your Coolcave. A large main pocket lets you fill the tote with items big and small, perfect for trips to the supermarket, picnics, and everything in between. The tote lifts out of the Coolcave to bring with you into the store, gym, or wherever. - 20L capacity. - Double handles with adjustable shoulder strap. - Small interior zip pocket. - Expandable interior cinch closure. - Compatible with Coolcave pannier. - Large Specialized/Fjällräven logo print.

The Handlebar Bag provides easy-access storage and works just as well on urban missions as on gravel escapes. Slide it onto the handlebar frame and fasten it with straps (note that the handlebar frame is not included and must be bought separately for the handlebar bag to function on a bike). Should you not want to leave it on your bike, it detaches easily and you can carry it with the removable shoulder strap. Elastic mesh pockets on the top and sides for items you want close at hand. Two attachment points on the front for tent poles, accessories, or the Specialized/Fjällräven Snack Bag. Note: The lid and seams are not sealed, but the lining is waterproof, so the bag offers protection from the rain. Part of the Specialized/Fjällräven series for urban rides and bikepacking adventures. - Weather-resistant, semi-rigid design in Vinylon F with lining in 100% recycled nylon. - One-hand easy-opening closure with an elastic cord loop. - Mesh pockets on top and sides and zippered inside pockets. - Reflective logo increases your visibility in low-light conditions. - Volume- approx. 10 L - Material- Vinylon F (100% vinylal)

Versatile aluminum frame rack for transporting everything from postal packages to drybags or a tent on your bike. Attaches directly to the handlebar (fits handlebars with 31.8 mm diameter) and works with all types of bikes, except extreme downhill bikes. An anti-rotation guyline prevents the frame rack from tilting forward. Webbing straps to attach gear are not included. Part of the Specialized/Fjällräven series for urban rides and bikepacking adventures. - Light and strong aluminum construction. - Three under-rack accessory mounting holes for lights, cameras, etc. - Max load of 5kg. - Fits handlebars with 31.8 mm diameter and works with most types, including straight and drop models. - Compatible with Specialized's Future Shock suspension system. - Dimensions: 20 x 18 x 13 cm.

Designed to accommodate the more aerodynamic profile of aero bars and seatposts, the Stix Aero Strap mount gives you the ability to attach a Specialized Stix for day or night riding. - Stix light mount with longer, flexible silicone strap to fit Shiv and Venge seatposts, plus Aerofly handlebars.

Day or night, the Stix Elite headlight packs a powerful punch. Running in Steady-High mode at night, it delivers 100 lumens of focused, strong, and bright light to guide your way. It’s a true to-see-by headlight. During the day, your visibility and safety becomes its first priority. Running in Power Flash mode, this tiny package delivers 200 lumens-worth of, “see me now,” light, making it a beacon for all road users. And depending on the chosen mode, the Stix Elite will run for up to 112 hours, and it’s easily charged via built-in USB tab, which eliminates the need for a cable. - 12 to 200 lumens output - Spherical lens delivers a to-see-by beam pattern. Fresnel lenses for secondary LEDs provide wide angle visibility - 2.5- to 112-hour runtime - Charges in the USB port of any laptop or phone charger in two hours (no extra cables needed) - Flexible mounting system works with handlebars from 22.2mm up to 35mm in diameter - Six modes including: Steady High (100 lumens), Steady Low (38 lumens), Power Surge (97 lumens), Power Flash (200 lumens), Disco Flash (63 lumens), Eco Flash (12 lumens) - Red/Green battery charge level indicator - Additional mounting options available separately

Nothing says, “see me now,” louder than a strong and bright taillight, both for day or nighttime use. With its spherical lens, which directs lumens more than a 1/2 mile (800m) in the brightest California sun, the Stix Elite taillight is the go-to taillight for our infamous Lunch Ride. It’s all about peace of mind, really, and with its six light modes, you get multiple options for day or night visibility. And depending on the chosen mode, this taillight will run for up to 77 hours, and it’s easily charged via built-in USB tab, which eliminates the need for a cable. - 12 to 100 lumens output - Dome lens concentrates output from CREE XBD P4 center LED for 1/2 mile (800m) visibility in the brightest sun. Fresnel lenses for secondary LEDs provide wide angle visibility - 2.5- to 77-hour runtime - Charges in the USB port of any laptop or phone charger in two hours (no extra cables needed) - Flexible mounting system works with seatposts from 22.2mm up to 35mm in diameter, plus it's compatible with most seatstays (Aero strap mount available separately) - Six operating modes: Steady High (50 lumens), Steady Low (18 lumens), Power Surge (37 lumens), Power Flash (100 lumens), Disco Flash (40 lumens), Eco Flash (12 lumens) - Red/Green battery charge level indicator - Additional mounting options available separately

Mounts a Specialized Stix light to a CPSC, DIN standard reflector/rack bracket or the Specialized Pizza Rack. - Vertical CPSC hole pattern. - This mount can attach to the Horizontal Din hole pattern. - Specialized single hole pattern for the Pizza Rack. - Mounts Stix light horizontally. - Includes all mounting hardware.

A true two-in-one, the Stix Switch comes at you with a ying/yang mindset, flipping between red or white modes depending on your ride needs. Simply press and hold the button and you can go from a bright red taillight to a simple white headlight in seconds. Increase visibility and flexibility with the Stix Switch. - Headlight or taillight—you decide. - Press-and-hold for two seconds to shift between white and red modes. - Three white modes including: Steady (65 lumens), Power Flash (100 lumens), Eco Flash (35 lumens). - Five red modes including: Steady (18 lumens), Surge Glow (16 lumens), Power Flash (30 lumens), Disco Flash (15 lumens), Eco Flash (8 lumens) - 2- to 20-hour runtime. - Fresnel lens for maximum visibility in all directions. - Charges in the USB port of any laptop or phone charger in two hours (no extra cables needed). - Flexible mounting system works with handlebar and seatposts from 22.2mm up to 35mm in diameter, as well as most seatstays. (Aero strap mount available separately). - Red/Green battery charge level indicator. - Additional mounting options available separately.

The new Turbo Connect Display (TCD) is the best way to view data on your Turbo. It not only displays basic ride metrics (speed, cadence, power, battery level, and time), but it also lets you toggle between modes. Its design, meanwhile, is rugged and clean, and it has multiple mounting options for either road or mountain setups. As for the latest version of the Mission Control App, you’ll find that it now has more features and is even more intuitive to use. It lets you custom-tune nearly every aspect of the bike with ease, monitor your power usage, control your range, perform basic system diagnoses, and record/upload rides. - Monochrome LCD display (black/white). - Screen Size: Height (40mm), Width (35mm), Diagonal (52mm), Display (2 inches) - ANT+ & Bluetooth modules for easy communication. - Sits centrally on the handlebars at the stem and has either a twist-lock or an optional theft-resistant lock. - Twist-lock can be turned on the handlebars, while the display also fits others popular mount options. - Protection standard IPX7 (suitable for splashes, rain, or snow).

The Zee Cage II has incredible holding power, and it's compatible with SWAT solutions for tool and storage integration. For easy bottle access, we also gave it a unique side-loading design that allows you take pulls from the right-hand side. - SWAT-compatible design allows for storage and tool integration. - Reinforced composite material improves durability without adding weight. - Side-loading design allows for secure bottle retention with easy in-and-out accessibility for frames with a compact bottle mounting area. - Left-hand loading on the down tube—right-hand loading on the seat tube. - Sleek, minimalist design with razor-sharp graphics. - Accepts SWAT Cage Mount MTB Tool. - Accepts MTB SWAT Box (when used on compatible frames). - Weight: 43g

The Zee Cage II has incredible holding power, and it's compatible with SWAT solutions for tool and storage integration. For easy bottle access, we also gave it a unique side-loading design that allows you take pulls from the right-hand side. - SWAT-compatible design allows for storage and tool integration. - Reinforced composite material improves durability without adding weight. - Side-loading design allows for secure bottle retention with easy in-and-out accessibility for frames with a compact bottle mounting area. - Right-hand loading on the down tube—left-hand loading on the seat tube. - Sleek, minimalist design with razor-sharp graphics. - Accepts SWAT Cage Mount MTB Tool. - Accepts MTB SWAT Box (when used on compatible frames). - Weight: 43g

Skratch Labs Anytime Energy Bar is made with real ingredients such as fruits, nuts and quinoa. It has enough fuel to power you through endurance workouts and is tasty enough to be used as a snack any time of day.

Skratch Labs Sport Energy Chews are made with simple ingredients and flavored with only real fruit to create an energy chew with a clean bite that isn’t coated in wax. The result is a subtle taste that lets you fuel your active lifestyle with a functional food.

Our Sport Hydration Drink Mix was created for a simple purpose—to replace the electrolytes lost in sweat and to provide a little bit of energy when working out, without offending your palate or gut. We initially created this drink because some of the world's best athletes needed better. Conventional sports drinks made them sick. They were undrinkable—too sweet, over-flavored, and didn't even replace what was lost in sweat—which defeated the whole purpose, like fighting thirst with more thirst. The best athletes needed something to safely hydrate, something to quench their thirst, and something to help them perform better. So with their help, we reimagined sports drinks, stripping down what used to be a neon-colored carnival to its bare essentials. In the process, we learned that simple wasn't just better for elite athletes, it was better for everyone who works hard and sweats. The result is a sports drink with minimal sugar (4g per 100 ml) and a ratio of sugar (glucose + fructose) that is optimized for faster absorption, an electrolyte profile that actually matches what is lost in sweat (800 mg sodium, 80 mg potassium, 100 mg calcium, and 80 mg of magnesium per liter), and only real fruit for flavor for a light and refreshing taste that you can drink all day. That's it—less sugar, the right electrolyte profile, and real fruit. So, if you've never met a sports drink you wanted to take home, your luck is about to change. Drink when thirsty and leaking like a busted fire hydrant. Don't drink while deep in the middle of a Netflix marathon session or sending emails (unless, you're also on your trainer). Meaning, if you haven't earned it, you don't deserve it.

Skratch Labs Sport Recovery Mix is a high calorie food that you can drink. It’s designed to be a very convenient way for you to consume a lot of delicious calories with an optimal ratio of carbohydrate, protein, fat, and salt to refuel and rehydrate you immediately after your longest and hardest workouts when you don’t have access to a freshly prepared meal from scratch.

With 20 tools, the Venti is the kitchen sink of multi-tools. Everything you might need for any road or trailside repair. Never get stuck because you left a tool at home again. - Forged chain breaker for 10-12 speed chains - Magnetic masterlink storage - Forged and plated steel tools - Includes: 2, 2.5, 3, 4, 5, 6, and 8 mm hex; 8, 10, 20, 25 Torx; Phillips #2/SL4; 7mm box wrench; 8mm flare nut wrench; 10mm open end wrench; disc pad spreader; valve core remover; and 13g/15g spoke wrenches - Weight: 160 g - Dimensions: 80x46x14 mm

The Italian Army Knife, a very SILCA take on the traditional multi-tool. We've addressed the things that frustrate us with conventional multi-tools, while keeping the layout that fits conveniently in the SILCA EOLO Wallet or Seat Roll Premio. The mid-length tool design is long enough to provide access to recessed fasteners, but short enough not to experience twist or damage under moderate torque as can happen on longer tools. All tools are forged rather than bent from hex stock. While this method of construction is more expensive, the value is unquestioned during a road-side repair. Mid-length tools also allow us to position the tools within the same plane, reducing the thickness of the overall package by half. Double-chromed tools and fully stainless steel hardware and bushings guarantee a long life without corrosion (the number 1 killer of multi-tools is corrosion). Forged aluminum sidebars contain rare-earth magnets for holding a spare chain connector. - Forged and machined sidebars with integrated chain-connector storage. - Tredici (Tre-dee-chee) 13 forged and plated tools: Hex 2/2.5/3/4/5/6/8 + Torx 10/20/25 + PH2/Flat + DiscPadSpreader. - 8mm adapter connects to the 5mm hex for optimal use of space. - Stainless steel pivot hardware - 98 grams

Named after the Italian word for Brick, Mattone is a water-resistant, ultra-compact seat bag that attaches to the rails using the BOA Closure System.  Unique zipper design allows it to be accessed while on the bike, or to open like a book when removed from the bike for easy access. Mattone is for the cyclist looking to carry a spare tube, CO2, multi-tool, and some cash in a discreet, water-resistant package. Internal divider holds ID, credit card, or cash while also protecting your tube from your multi-tool! Seat bag users fall into two categories: Seat Roll aficionados and seat bag users. Traditionally, seat bags have been simple open spaces that allowed content to jangle about, making noise and rubbing against each other. Often times a spare tube was pulled out of a seat bag to reveal it was more full of holes than the tube being replaced due to friction against a house key or multi-tool. With Mattone, we designed a layout similar to a book, where the bag can fully open to hold the tube and CO2 cartridge on one side, separated by a padded ballistic nylon 'page' separating it from the other side where you can store an inflator head, multi-tool, contact lens case, etc. The 'page' also contains a slot for a credit card, ID, money, or house key. The unique off-center Aquaguard Zipper allows the case to completely open and lay flat when off the bike, while also allowing easy access to the multi-tool and money/card slots when on the bike without risk of spilling all the contents of the bag. A high-friction Hypalon strap with BOA Closure completes the package. Making more than 15x the power of Velcro, the BOA Closure uses a ratcheting mechanism that will not creep or loosen even under the most extreme vibration and impact. This ensures the Mattone will remain 'high and tight' under your saddle until you need to access it...no swinging, swaying, or rattling...ever. - Exterior—Sleek black finish with reflective graphics - Interior—Hi-contrast red material with separate ID, credit card, or money flap - Interior Volume—Holds one inner tube, one CO2 cartridge, one tire lever (all of these components are sold separately and are not included) - BOA Closure System with open guide release on Hypalon retaining strap - YKK Aquaguard zipper - Outside Dimensions: 13cm x 8.5cm x 5.5cm - Volume: Approximately .61 L - Strap Measurements: 27cm x 4.5cm

Seat Capsule Premio is our BOA-powered saddlebag option for those that prefer more structure and internal volume than what a seat roll has to offer. A high-strength thermoformed shell creates a modular structure with two internal dividers that help keep everything organized. The capsule is secured to the bike using the BOA Closure System, and features a Rail Guard for superior grip and protection of the saddle rails. The zipper is a YKK locking model that bisects the lower third of the bag. Our designer chose this low position to make it easier to access the bag while it's still attached to the saddle; a key difference between a seat bag and a seat roll. - High strength Thermoformed shell - Boa Closure System with Guide - Rail Guard protects and grips saddle rails - YKK Locking Zipper - NO Velcro to damage your seat post or inner short legs - 625cc Internal Volume

The Apollo is a waterproof super bright LED light that is small & easy to mount. - USB Rechargeable - Strap Fits Bars 20 – 40mm - Waterproof - Micro USB Cable Included - 240° Visibility Specs: - Modes: High: 3 hrs, Medium: 6 hrs, Slow Flash: 50 hrs & Quick Flash: 40 hrs - Weight: 29 Grams With Bracket - Runtime: Up To 50 hrs On Flash - Battery: Lithium Polymer

Ring-a-ding-a-ding! Get noticed and keep slowpokes out of your way with Serfas' line of minimalist style, simple-to-use handlebar mounted bicycle bells. The perfect socially acceptable alternative to shouting crowd favorites such as "watch out!" and "move it or lose it!" - Aluminum Construction - Multi-Strike Mechanism - Secure Screw Type Bracket w/ Rubber Insert - Anodized Silver Finish - Fits 19 - 22.2mm Diameter Handlebar

We love cup holders in our cars so why not add one (or two) to your bike! Perfect for cruising the neighborhood and riding out-and-about town on a thirsty Thursday. Make your friends jealous and securely stash your average twelve-ounce sized beverage container within arm's reach by using this handy injection molded handlebar-mounted cup holder. - Simple one-screw universal handlebar installation w/ rubber anti-slip grip strip - Foam-padded ring inside holder bottom to alleviate beverage rattling & vibration - Center bottom condensation drain hole - Wall Thickness: 2mm - Holder Inside Diameter: 66mm - Fits a 12oz. can (US Standard)

An economical and stylish starter headlight/taillight combo kit that uses common AA & AAA (2x) batteries. (Batteries included) Starter SL-80 Headlight: - Side Lighting For 180-Degree Visibility - AA Battery Operation - Easy Battery Access - Modes: High (80 Lumens) 1.75 Hours / Medium (40 Lumens) 3.25 Hours / Low (20 Lumens) 7.5 Hours / High Flash – 8 Hours / Daytime Flash – 10 Hours Runtime: Up To 10 Hours (On Daytime Flash) TL-411 4-LED Tail Light: - Four 3mm Red LEDs - Built-In Backpack/Pocket Clip - Long Battery Life - Uni-Tail Light Bracket Included - Lightweight - Light & Bracket Can Be Removed In Only Seconds - Up To 1/4 Mile Visibility - Optional Rack Mount - AAA Batteries (x2) Included - Modes: Alternating & Flash: High – 35 Hours / Slow Flash – 70 Hours / Quick Flash – 70 Hours / Scrolling Flash – 70 Hours - Runtime: Up To 70 Hours (Depending On Mode)

Cell Phone Top Tube Bag - Replaceable Cover (Lt-Stm4Rt) - Large Secondary Pocket - Secure Three Strap Design - Touch Screen Capable Replacement Cover - Cell Phone Cover Will Fit Up To Iphone 6+™ - Size: 7” X 4” X 3.75” - 105 Cubic Inches

The All New 2021 Serfas® E-Lume Series Headlight New for 2021 our E-Lume Series Headlights feature a redesigned extruded aluminum housing, new optical lens with excellent side visibility, and improved battery capacity and LED performance. We made not only increased performance a priority but also improved rider visibility, so we designed an all new optical lens and housing with front corner cutouts to allow drastically more light be visible when viewed from either side – and this all without any reduction in quality of forward illumination or beam pattern. Constructed of aluminum the E-Lume housing is strong and lightweight as well as an efficient thermal conductor which effectively reduces heat buildup thus helping maintain temperatures for optimal battery performance and consistent light output. Light output of the E-Lume 600 is sent through a single optical lens creating a powerful beam with strong front illumination and excellent side visibility. Limited Lifetime Warranty Serfas® warrants to the original purchaser that the product is free of defects in material, construction, and/or workmanship for the lifetime of the product. Battery Warranty – One Year Coverage Serfas® batteries are covered by a 1 year warranty from the original date of purchase. Features: - All-In-One Design - Extruded Aluminum Body - Press and Hold Button Lock - Daytime Flash Mode - Up To 90 Hours Runtime - Integrated USB Rechargeable Li-Ion Battery - Backlit Button Indicates Charge Status and Low Battery - Handlebar Bracket - USB Charging Cable Specs: Solid Mode: - Overdrive – 600 Lumen / 2.5 hrs - High – 300 Lumen / 6 hrs - Medium – 150 Lumen / 12.5 hrs - Low – 75 Lumen / 22 hrs Flash Mode: - Daytime Flash – 600 Lumen / 75 hrs - Low Flash – 100 Lumen / 90 hrs Weight : 170g w/ Bracket Battery: 1-Cell Li-Ion 2600 mah Charge Time: 4 hrs To Full At 700mA Using USB Wall Charger Color: Black

USM-350 E-Lume 350 Lumen Headlight - All-In-One Design - Extruded Aluminum Body - Press and Hold Button Lock - Daytime Flash Mode - Up To 90 Hours Runtime - Integrated USB Rechargeable Li-Ion Battery - Backlit Button Indicates Charge Status and Low Battery - Handlebar Bracket - USB Charging Cable UTM-30 Cosmo 30 Lumen Tail Light - 270 Degree High Visibility Design - Highly Adjustable Mounting System - Daytime Flash Mode - 5 Modes: 2 Solid / 3 Flash - Micro USB Rechargeable

USM-600 E-Lume 600 Lumen Headlight - All-In-One Design - Extruded Aluminum Body - Press and Hold Button Lock - Daytime Flash Mode - Up To 90 Hours Runtime - Integrated USB Rechargeable Li-Ion Battery - Backlit Button Indicates Charge Status and Low Battery - Handlebar Bracket - USB Charging Cable UTM-60 Cosmo 60 Lumen Tail Light - 270 Degree High Visibility Design - Highly Adjustable Mounting System - Daytime Flash Mode - 5 Modes: 2 Solid / 3 Flash - Micro USB Rechargeable

The best of both worlds are now combined into one. Three tire levers and a CO2 inflator head round out this combo tool. Features: - 1 Tire Lever With Built In CO2 Inflater - 2 Tire Levers With Built In Spoke Hooks - Presta & Scharder Valve Compatible Specs: - Number of Tools: 2 - Weight: 38 Grams - CO2 Lever Length: 5 1/4? - Lever Length: 4 1/2?

Serfas' Key Cable Lock offers strong protection. The 15mm-diameter cable reaches 6-feet and self coils for easy storage. A key combination lock, surrounded by molded rubber, ensures your bike stays put. And, a vinyl coating protects your bike's finish so it looks just as good when you return to ride it.

Serfas' Key Cable Lock offers strong protection. It's 6-feet long to reach around the frame and wheels, uses 12mm-diameter cable and a stout key lock for safety, is self coiling for easy storage, and is vinyl coated for weather resistance and to protect your frame's finish.

Brighten up your style, increase your visibility, and make those nighttime rides more fun with the Serfas SPK Spoke Lights! Available in FIVE fun LED light colors: White, Red, Green, Multicolored, and Blue. The SPK Spoke Light is quick and easy to mount and sure to stay safely secured while traveling across any terrain, and with built-in water resistance the SPK ensures a splash or two won't send you home in the dark. Add one, or even twenty, to your bike today and be the coolest cat on the block! - Water Resistant - Fast & Easy Installation / Removal - Solid Modes: Up To 30 Hours - Flash Modes: Fast – Up To 35 Hours / Slow – Up to 55 Hours - Weight: 20 Grams - Size: 12.8cm x 4.4cm - Battery: 1 x Lithium CR2032

It’s a CO2 & a mini tool all in one! Features: - Tools Included: 8, 6, 5, 4, 3, 2.5 & 2mm Allen Keys, Phillips & Flathead Screwdrivers, T25 - CO2 Inflator Built Into Tool - Presta & Schrader Valve Compatible Specs: - Number Of Tools: 11 - Weight: 136 Grams