Splitting the difference between the previous Flux 800 and 900, the Flux 850 gets the game-changing Mode Shift found on the Flux 1250. This means there are three steady modes, all using both the wide and spot beams. Go from Steady Low to Steady High in a single push, without cycling through a flash mode. Press-and-hold for two seconds and you get into the secondary modes: Steady Flash to be seen in busy urban environments, Flash Mode for endless runtime, and two Flashlight modes with 10 and 20 hours of runtime for hanging around the campsite, or when you forget to charge your light and need to conserve the last few percent of battery life to get home. IPX7 waterproof means this light can survive being submerged 1 meter deep for 30 minutes. No, it's not meant for scuba diving. But is can handle anything you can throw at it on two wheels. - Sculpted double beam pattern uses separate optics for wide and spot beams to put light where you need it and maximizes every lumen. The result is a beam pattern that torch-style lights can't touch. - 1x CREE XP-L High Intensity LED plus 1x CREE XP-G LED. - Quick-release bar mount works on 22.2, 25.4, and 31.8mm bars to put the light above, below, or in front the stem to clear cables and computer mounts. - Extra bright side lights to give you 180-degree visibility to other cyclists and motorists. - 2600mAh Li-ion internal battery is USB rechargeable via included micro USB cable. - Depending on mode, up to an additional three hours of super-low output are available when listed runtimes expire. Trust us, someday you'll need this. - Steady High mode: 850 lumens for 1:30 hours - Steady Medium mode: 450 lumens for 3:00 hours - Steady Low mode: 250 lumens for 6:00 hours - Press-and-hold to turn off, long press-and-hold to enter secondary modes. - Steady Flash mode: 300 + 200 lumens for 4:00 hours - Daytime Flash mode: 400 lumens for 20:00 hours - Very low mode: 100 lumens for 10:00 hours - Super low mode: 50 lumens for 20:00 hours - Extra-long press-and-hold to lockout light for travelling.

Here's proof you don't need tons of suspension travel to tackle challenging trails. Equipped with an all-new longer, lower, and rowdier chassis, we've added 27.5x2.6 wheels and tires to the Fuse Sport 27.5 to create a bike that lets you hit rocks and roots at speed with absolute control. - 130-millimeters of suspension courtesy of a RockShox Judy Silver TK fork. - Highlights include SRAM Level hydraulic disc brakes and TranzX dropper post. - Wide-range SRAM SX 1X drivetrain provides crisp shifts and gearing to tackle any hill.

The Ground Control Control 2Bliss Ready T5 uses an extremely versatile tread pattern which can be used from cross country race to trail, it rolls fast with exceptional amounts of confidence and grip. Our Block-In-Block design uses a taller adaptable inner block to pierce the ground and claw for traction. The larger outer structure supports the inner block for additional speed, traction, support and stable handling. The Control casing is our light and durable do it all XC construction. To top off this build we use our fastest rolling, race-ready T5 compound with excellent wear and tear protection. - Casing: 60 TPI, light and durable do it all XC construction - Bead: Foldable - Butyl wrapped bead = 2Bliss Ready - Compound: GRIPTON T5 - 29 x 2.2", PSI 25-50, approximate weight 800g - 29 x 2.35", PSI 25-50, approximate weight 845g

Kids move fast, and grow faster. At times, it can seem like there's a small window for the perfect bike fit. The right bike for a young rider is a delicate balance between too small, too big, and a short-lived just right. If we're going to inspire the next generation of riders, we need to keep kids comfortably riding longer. The Jett is designed so that you'll never fear the growth spurts. We did our homework to understand how kids grow—spoiler alert, kids' arms and legs grow more rapidly than their torso. We took to the books and designed a bike with child-specific touch points that withstand the development of young riders. The Jett is uniquely adjustable, perfectly proportional, and child-liftable, you'll always be set to Jett. The Jett Single Speed features an adjustable handlebar that allows kids to fine tune reach as their arms grow. The narrower saddle and grips were informed by a Retul study on kids to be the appropriately size, with handbrakes on both the 16-inch and 20-inch. And what's more, we designed the frame and reviewed every component to make the Jett one of the lightest bikes on the market. You're going to have to beg them to get off this bike. - We designed the Jett Single Speed to be uniquely adjustable with longer seatposts and adjustable handlebars so kids can dial-in the perfect riding position as they grow. - Every detail of the Jett Single Speed, including the 130mm Bridge saddle, narrower-diameter grips, and short-reach, tool-less adjustable brake levers, was informed by Retul data from a kids' research group to be perfectly proportional for young riders. - A lightweight bike is simply more fun and the Jett Single Speed's all-new A1 aluminum frame, alloy fork, Pathfinder tires, and single-speed drivetrain make it one of the lightest kids' bikes on the market.

When ripping singletrack on a hot day, you need shorts that can not only take a beating but keep you cool and comfortable. Cue the Trail Air Shorts. - 13.5" inseam (size 34 waist) fall low around the knee for a roomy fit that leaves plenty of room for pads. - Bonded pocket bag with zipper opening provides a convenient, secure space to store your trail essentials. - Deflect UV 50+ protects your skin from harmful ultraviolet rays. - Does not include a liner. - Fabric Content: MAIN BODY: 86% Polyester, 14% Spandex; OTHER: 82% Nylon, 18% Spandex - Front buckle adjustment system ensures that the fit of the shorts is easily customizable and dialed-in, even when your pockets are loaded. - Laser-perforated venting adds sophisticated points of ventilation that don't detract from the durability or performance of the shorts. - VaporRize woven fabrics are treated to be water-repellant while remaining durable, stretchy, and lightweight for peace of mind on the trail.

One tube to rule them all! Are you riding a mixed wheel size mullet bike? Can't decide to bring a 27.5" or 29" spare? Or do you just want to be a trail hero saving others with your versatile tube that fits both 27.5" and 29"? The new MTN MULLET tube takes the guess work out of which size tube you should pack. At the drop of a hat, this tube is ready to take care of business up front or ride the party in the back. - 40mm Presta Valve - For tire size: 27.5/29x2.3-2.6 58-66x584/622 - Tube weight: 220g

Share your stoke with this limited-edition collection fresh from our custom vault. - New Era Premium Snapback Hat. - Mesh construction is paired with a woven front panel. - Embroidered logo. - Fabric Content: 100% Polyester.

Ruthless Progression This totally redesigned P.Series gives riders of all sizes a jumping off point to a life on bikes. The lightweight, but tough alloy frame is designed to take all the hits and keep rolling—across all frame and wheel size options. Our approach to these robust bikes centers around delivering a simple, high-quality platform that's versatile for all riders, and packs in category-first features that make a difference to the rider. Starting with the durable lightweight alloy frame, the new P.Series stands up to the demands of dirt jump progression. Its cables are internally routed, adding to its sleek presence and tangle-free riding. • Marzocchi Bomber, high performance and tunable. • Lightweight and strong single-speed P.Series wheelset. • Specialized Kicker tires find grip anywhere, street, dirt, or at the skatepark.

A neck gaiter is one of the "must have" pieces of any cool to cold weather ride, and this Prime-Series Thermal Neck Gaiter is no exception. With the use of Polartec Power Grid fabric, it keeps you plenty warm, without any added bulk. - 4-way stretch fabrication allows for easy pull-on and pull-off. - Fabric Content: 91% Polyester, 9% Spandex Knit.

With the Recon 1.0 our goal was simple - put S-Works Recon-inspired performance in a very accessible package. Easier said than done, but we've created a shoe with Body Geometry comfort and efficiency in a durable, dirt-focused shoe. So yeah, mission accomplished. Using our exclusive STRIDE toe-flex technology, the nylon outsole uses a TPU-injected forefoot for natural movement off-bike, while still providing a stiffness index of 6.0 for in-the-saddle performance. The Recon 1.0 is a double threat - efficiency at the pedals with comfort and confidence off bike. To create traction off the bike in wet or dry, gravel or dirt, we've covered the nylon outsole with our SlipNot compound. We've also lifted the heel for an even more natural feeling while walking. Three Velcro closures make slipping into the Recon 1.0 easy, and creates a fit designed for all day comfort and performance, whether your ride calls for open gravel, twisting single track, and more than your fair share of hike-a-bike. - Body Geometry sole and footbed are built with purpose and backed by science to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment. - Injection STRIDE toe-flex technology allows for natural toe movement off-bike but remains stiff for pedaling (stiffness index 6.0) - SlipNot rubber tread for confident traction on all terrain. - Two-bolt cleat pattern fits all major MTB pedals. - Approximate weight: 331g (1/2 pair, Size 42)

The Roadsport Elite is an extremely reliable road tire that's ideal for ambitious training and high-mileage rides. It features our BlackBelt protection and tread life that lasts 20% longer than most light weight tires. This provides great protection throughout the tire's life. The foldable construction creates a lightweight and supple tire that's easy to install. - 700x26mm, psi 100-125, approximate weight 280g - 700x28mm, psi 85-95, approximate weight 325g - Bead: Folding - Casing: 60 TPI - Compound: 60a - Flat Protection: BlackBelt

We created the endurance road category two decades ago proving that high ergonomics means high performance. Today, the new Roubaix SL8 with Future Shock 3.0 is lighter, faster, and smoother than any road bike ever made, unleashing unmatched confidence. The road may be hell below, but on Roubaix, it's always heaven above. - COMPLIANCE: Future Shock 3.0 is the star of the show, more tunable, adjustable, and durable than ever. Now, regardless of position on the bike, every rider experiences 20mm of smooth, stiction-free travel between the stem and head tube. Future Shock helps keep your hands and bars steady for a smoother ride with more control to stay fast, safe, and confident. - Our dropped clamp design exposes more seatpost to increase deflection, but "more" isn't simply better. The Pave seatpost controls that deflection for the optimal vertical compliance. Together they create 'Cobble Gobbler' technology, and when paired with the Roubaix's rigid rear triangle, deliver a smooth ride with no loss in efficiency. - The Roubaix SL8 is the smoothest road bike our Ride Science Team has ever tested-reducing impacts at the bars and saddle by 53% vs. the nearest competition. With Roubaix's Future Shock 3.0 the wheel quickly moves over the bump, while rider mass remains stable, maintaining momentum in rough terrain. Typical forks deflect backward on impact, causing a measurable loss in speed. It's a scientific fact, smoother is indeed faster. - CAPABILITY: The Roubaix pioneered endurance geometry, so you ride "IN" the bike, not "ON" the bike to relieve pressure on your hands, arms, and shoulders for capability and confidence on any road, yet it's ready to dissect a mountain decent at full gas. Snuggle up. - With tire clearance up to 38c/40mm, this endurance road machine delivers better traction than ever on rough roads and even light gravel. Thanks to lightweight, super-efficient Specialized tires, that extra tire volume and traction comes with no downsides. - Roubaix inspires really BIG days on the bike, so we've given it every mount your adventures could need- three bottle mounts, top-tube mounts, and it's even fender-ready. So, go ahead and bring it all along for the ride. - PERFORMANCE: The new Roubaix SL8 is our most aero yet, with new aero shapes from our Free Foil library and dropped seat stays. At just 825 grams, the frame is 50 grams lighter, utilizing lessons learned from the Aethos—the world's lightest production frame—and our premium Fact 12r carbon blend. Nothing in its class is faster or lighter than the Roubaix.

The most aero road helmet in the peloton now breathes better. The S-Works Evade 3 was reinvented from the inside out to cool better, making it the fastest choice for more stages. Through extensive Computational Fluid Dynamics and Win Tunnel testing, we created a rear "diffuser" that helps minimize drag and improve ventilation. The diffuser helps optimize aero performance by allowing air to release easier and improves ventilation by drawing 10% more air through the helmet at a given speed. The Occipital Base Adjustment optimizes comfort by personalizing fit to individual head shape and helmet angle can be adjusted for compatibility with glasses. An adjustable Tri-Fix web system gives riders added comfort with updated, thinner 10mm webbing that minimizes strap noise. And the ANGi-ready, ultralight Mindset micro-dial fit system with height adjustability has been updated for improved grip and reaction for easy on-the-go fit. Our ultralight and supremely comfortable MIPS Node Air technology is integrated directly into the helmet padding, with a sleek low friction layer designed to dissipate rotational forces. With Specialized's proprietary development work, we added perforations to maximize breathability, performance, comfort, and weight savings. - Enlarged front vents help increase ventilation. - Rear Diffuser for aero and ventilation benefits. - MIPS Air Node is MIPS' most ventilation-focused solution. - Adjustable Tri-Fix web splitter boosts comfort through personalized fit. - Precision, full-wrap polycarbonate shell for increased durability and premium finish. - Dual-density optimized EPS foam.

When tubeless performance on race day is mandatory but durability for rough roads all season is just as important the S-Works 2BR delivers—from cobbled classics to your daily lunch ride. Our all-new Gripton T2 compound is the fastest, most efficient compound we’ve ever created. We’ve combined this with the legendary grip of our Gripton T5 compound on the shoulders to the Turbo 2BR more grip, speed, and durability than ever before—six watts faster vs the previous 2BR and just 260 grams for a 26mm tire. - Casing: 120 TPI - Bead: Foldable 2Bliss Ready - Dual Compound: GRIPTON T2/T5 - Flat Protection: BlackBelt - 700 x 26mm, psi 70-110, approximate weight 260g - 700 x 28mm, psi 70-95, approximate weight 280g - 700 x 30mm, psi 65-90, approximate weight 300g

Built for those who simplify and go, the Cave Tote is our minimalist accessory for your Coolcave. A large main pocket lets you fill the tote with items big and small, perfect for trips to the supermarket, picnics, and everything in between. The tote lifts out of the Coolcave to bring with you into the store, gym, or wherever. - 20L capacity. - Double handles with adjustable shoulder strap. - Small interior zip pocket. - Expandable interior cinch closure. - Compatible with Coolcave pannier. - Large Specialized/Fjällräven logo print.

Versatile aluminum frame rack for transporting everything from postal packages to drybags or a tent on your bike. Attaches directly to the handlebar (fits handlebars with 31.8 mm diameter) and works with all types of bikes, except extreme downhill bikes. An anti-rotation guyline prevents the frame rack from tilting forward. Webbing straps to attach gear are not included. Part of the Specialized/Fjällräven series for urban rides and bikepacking adventures. - Light and strong aluminum construction. - Three under-rack accessory mounting holes for lights, cameras, etc. - Max load of 5kg. - Fits handlebars with 31.8 mm diameter and works with most types, including straight and drop models. - Compatible with Specialized's Future Shock suspension system. - Dimensions: 20 x 18 x 13 cm.

The Stumpjumper EVO Pro is a testament to full-gas trail performance. With an all-new design, from its S-Sizing geometry with an adjustable head tube angle, to its 150mm of shred-ready travel, this thing is a full-on ripper. And to top it off, it's build has been hand-picked to keep overall weight low and stoke high. Fox Factory suspension? Check. Carbon 30mm-wide wheels? Check. XO1 Eagle drivetrain? Oh, yeah. With the Stumpjumper EVO Pro, you get all the goodies at a more palatable price. - All the travel in the world is useless without the proper shock tuning and kinematics. For the new Stumpjumper EVO design, we prioritized kinematic performance. Applying lessons learned while developing the Enduro, then following that with more than 1,000 hours of field and suspension lab development, we've not only improved the pedaling performance of the Stumpjumper, but we've made it more capable, agile, and lively. We increased anti-squat, so the suspension better resists pedal bob, and we further improved bump performance on square-edge hits. Bottom line? This thing shreds trails, not legs. - Rider-First Engineered frames use a size-specific approach to ride characteristics that ensures benchmark handling and flawless performance, regardless of frame or rider size. Whether you're a jump-happy grom riding an S1, or a DH-fiend giant in need of the lengthy S6, you'll experience the same ride traits (rail-sharp cornering and balanced front and rear stiffness) at the lightest-possible weight. - The S-Sizing geometry of the new Stumpjumper EVO is our most progressive yet. Long, low, slack, short offset fork, steeper seat tube angle - these are requirements for modern progressive riding. But not everyone jibs the same way, which is why the geo on the new Stumpjumper EVO is fully adjustable with six different settings. You can adjust the BB height by 10mm, you can adjust your head angle by two-degrees, and you can make these adjustments independently of each other. Finally, if you want to go full-party mullet-mode, the EVO lets you run a 27.5-inch rear wheel mated with a 29-inch front. - We introduced the SWAT door on the Stumpjumper in 2016, adding room IN your frame for those "oh sh**t" necessities like pumps and spare tubes, and immediately rendering jersey pockets redundant. With the new Stumpjumper, we have increased the volume and added a SWAT Bladder, giving you an extra 22oz of water storage (the same size as a small water bottle) hidden in your downtube.

In order to bring EVO fun to the masses, we took our FACT 11m carbon frame (yes, the same one as the S-Works), dressed it with a bullet-proof SRAM GX Eagle 12-speed drivetrain and a tough-as-nails set of alloy wheels, and set it loose to shred unsuspecting trails everywhere. - All the travel in the world is useless without the proper shock tuning and kinematics. For the new Stumpjumper EVO design, we prioritized kinematic performance. Applying lessons learned while developing the Enduro, then following that with more than 1,000 hours of field and suspension lab development, we've not only improved the pedaling performance of the Stumpjumper, but we've made it more capable, agile, and lively. We increased anti-squat, so the suspension better resists pedal bob, and we further improved bump performance on square-edge hits. Bottom line? This thing shreds trails, not legs. - The S-Sizing geometry of the new Stumpjumper EVO is our most progressive yet. Long, low, slack, short offset fork, steeper seat tube angle—these are requirements for modern progressive riding. But not everyone jibs the same way, which is why the geo on the new Stumpjumper EVO is fully adjustable with six different settings. You can adjust the BB height by 10mm, you can adjust your head angle by two degrees, and you can make these adjustments independently of each other. Finally, if you want to go full-party mullet-mode, the EVO lets you run a 27.5-inch rear wheel mated with a 29-inch front. - Rider-First Engineered frames use a size-specific approach to ride characteristics that ensure benchmark handling and flawless performance, regardless of frame or rider size. Whether you're a jump-happy grom riding an S1 or a DH-fiend giant in need of the lengthy S6, you'll experience the same ride traits—rail-sharp cornering and balanced front and rear stiffness—at the lightest possible weight. - We introduced the SWAT door on the Stumpjumper in 2016, adding room IN your frame for those "oh sh*t" necessities like pumps and spare tubes and immediately rendering jersey pockets redundant. With the new Stumpjumper, we have increased the volume and added a SWAT Bladder, giving you an extra 22oz of water storage—the same size as a small water bottle—hidden in your downtube.

Total control, unparalleled bump-eating suspension, and fine-tunable geometry are hallmarks of the all-new Stumpjumper EVO Expert. Top it off with a build that blends quality, affordability, and durability, and it's the perfect trail partner, no matter where those trails are, or how rowdy they get. - All the travel in the world is useless without the proper shock tuning and kinematics. For the new Stumpjumper EVO design, we prioritized kinematic performance. Applying lessons learned while developing the Enduro, then following that with more than 1,000 hours of field and suspension lab development, we've not only improved the pedaling performance of the Stumpjumper, but we've made it more capable, agile, and lively. We increased anti-squat, so the suspension better resists pedal bob, and we further improved bump performance on square-edge hits. Bottom line? This thing shreds trails, not legs. - The S-Sizing geometry of the new Stumpjumper EVO is our most progressive yet. Long, low, slack, short offset fork, steeper seat tube angle—these are requirements for modern progressive riding. But not everyone jibs the same way, which is why the geo on the new Stumpjumper EVO is fully adjustable with six different settings. You can adjust the BB height by 10mm, you can adjust your head angle by two degrees, and you can make these adjustments independently of each other. Finally, if you want to go full-party mullet-mode, the EVO lets you run a 27.5-inch rear wheel mated with a 29-inch front. - Rider-First Engineered frames use a size-specific approach to ride characteristics that ensure benchmark handling and flawless performance, regardless of frame or rider size. Whether you're a jump-happy grom riding an S1, or a DH-fiend giant in need of the lengthy S6, you'll experience the same ride traits—rail-sharp cornering and balanced front and rear stiffness—at the lightest possible weight. - We introduced the SWAT door on the Stumpjumper in 2016, adding room IN your frame for those "oh sh**t" necessities like pumps and spare tubes, and immediately rendering jersey pockets redundant. With the new Stumpjumper, we have increased the volume and added a SWAT Bladder, giving you an extra 22oz of water storage—the same size as a small water bottle—hidden in your downtube.

If you wanna speed up your game then you need to get ahold of SupaSox. These woven pieces of art are not only pleasing to the eye, but also have superior performance. SupaSox are smooth and easy to put on, fitting extremely snug yet breathable. The wicking technology keeps your feet dry and cool in all conditions. - Crew Height - Snug and Breathable - Wicking Technology

It's All in Your Tactic. With an unprecedented combination of fit, ventilation, and confidence for trail and enduro riding, the Tactic helmet delivers exceptional coverage and seamless integration with goggles or glasses. - Tune a more precise, personalized fit thanks to Tactic's slim, incredibly adjustable Integrated Fit System that accommodates variations in head shape and occipital base. - Occipital base adjustment personalizes fit for comfort and allows you to tune helmet angle to ensure that your helmet and eyewear stay perfectly synched. - Integrated fixed visor provides increased trail vision and a seamless interface with eyewear. Specifically designed eyewear channels always give you a spot to store your glasses at a moment's notice. - 380 grams (medium) of lightweight performance. - Computational Fluid Dynamic design integrates the maximum volume of internal channeling for optimal airflow through the helmet drawing heat away from the head. 4D brow cooling, which provides a gap between the helmet and forehead, draws airflow into internal air channels at every speed. - Whether you're riding acoustic or e-MTB, the Tactic passes the e-bike Standard NTA8776 so you can can send it with confidence on whatever bike choice you make. - The Tactic earned the highest 5-Star Virginia Tech Helmet Rating from the internationally renowned Virginia Polytechnic Institute and State University. - Fitted with a MIPS Evolve solution to provide 10 to 15 millimeters of rotation in every direction. - Integrated fit system allows for extended (occipital) coverage. - This helmet is ANGi ready, with a fit system mount designed for easy integration with our ANGi crash sensor.

Nothing is faster than the Tarmac SL8 thanks to a combination of aerodynamics, light weight, and ride quality previously thought impossible. After eight generations and over two decades of development, it's more than the fastest Tarmac ever—it's the world's fastest race bike. Your legs up for it? AERO IN EVERYTHING We're putting aero where it matters—the leading edge—not just where it looks good. In the process we've created our most aerodynamic road bike ever. Yes, it's more aero than the Venge. Clean air is optimized for maximum advantage with the Tarmac's new nose cone—the Speed Sniffer. By moving the steer tube back—the tube that determines head tube width—the leading edge of the head tube can be much sharper, delivering a much lower drag shape. Utilizing new UCI rules, the Tarmac SL8 has the narrowest, most aero seat post we've ever made ensuring fast-moving, dirty air around the legs can flow back more cleanly. Doesn't victory smell sweet? GOES LIKE HELL, RIDES LIKE HEAVEN With massive gains in stiffness-to-weight—an improvement of 33% over the SL7—the Tarmac SL8 takes legendary handling, aggressive responsiveness, and World Championship proven geometry to the next level. The bike is stiffer at the pedals, more precise at the bars, and combines it with a compliant ride in the saddle that sets a new benchmark for race bike comfort. Thanks to our Rider-First Engineering, every rider, regardless of size, gets the same unprecedented ride quality and handling. In the saddle the Tarmac SL8 delivers 6% more compliance, floating over rough roads with a supple feel unique in the high-strung world of race bikes. Tarmac's proven geometry and 32mm tire clearance are identical to the SL7, ensuring easy adaptation and the versatility to run higher volume tires when needed. BEYOND GENDER There can be more differences between two male cyclists than between a male and female. Gender alone doesn't provide nearly enough data to specialize and that means creating male or female bikes is arbitrary and outdated. Every rider can get the next-level advantage of Tarmac SL8. It's time to go Beyond Gender. The Tarmac SL8 Expert delivers exceptional performance with a full SRAM Rival eTap AXS groupset with a power meter, C38 carbon tubeless-ready wheelset and an SL7 stem with Specialized Expert Shallow Drop alloy handlebars makes for an accessible performance-packed bike.

The Torch 2.0 Road shoes are all about comfort — well, comfort and performance that is. Due to the materials, road shoes often feel stiff and uncomfortable. Specialized decided to address this annoyance head on, though. To do so, they've implemented a 100% mesh and TPU construction on the Torch 2.0 that allows for more wiggle room in the toe box and a less constrictive, sock-like feel. The upper is then paired with the medium-stiffness FACT carbon sole and a rubber heel and toe that provide the perfect degree of off-the-bike traction. For the closure, Specialized added a single lightweight Boa IP1 dial that features tool-free snap replacement capability, while also providing simple, on-the-fly micro-adjustments. - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment. - Carbon sole with a 7.0 Stiffness Index is engineered to be moderately stiff, yet light with a rubber heel and toe for off-the-bike traction. - Lightweight Boa IP1 dial closure for on-the-fly micro-adjustment, backed by the Boa Lifetime Guarantee. - Mesh and TPU upper for a supple fit. - Three-bolt cleat pattern fits all major road pedals. - Approximate weight: 235g (1/2 pair, Size 42)

With 20 tools, the Venti is the kitchen sink of multi-tools. Everything you might need for any road or trailside repair. Never get stuck because you left a tool at home again. - Forged chain breaker for 10-12 speed chains - Magnetic masterlink storage - Forged and plated steel tools - Includes: 2, 2.5, 3, 4, 5, 6, and 8 mm hex; 8, 10, 20, 25 Torx; Phillips #2/SL4; 7mm box wrench; 8mm flare nut wrench; 10mm open end wrench; disc pad spreader; valve core remover; and 13g/15g spoke wrenches - Weight: 160 g - Dimensions: 80x46x14 mm

The Italian Army Knife, a very SILCA take on the traditional multi-tool. We've addressed the things that frustrate us with conventional multi-tools, while keeping the layout that fits conveniently in the SILCA EOLO Wallet or Seat Roll Premio. The mid-length tool design is long enough to provide access to recessed fasteners, but short enough not to experience twist or damage under moderate torque as can happen on longer tools. All tools are forged rather than bent from hex stock. While this method of construction is more expensive, the value is unquestioned during a road-side repair. Mid-length tools also allow us to position the tools within the same plane, reducing the thickness of the overall package by half. Double-chromed tools and fully stainless steel hardware and bushings guarantee a long life without corrosion (the number 1 killer of multi-tools is corrosion). Forged aluminum sidebars contain rare-earth magnets for holding a spare chain connector. - Forged and machined sidebars with integrated chain-connector storage. - Tredici (Tre-dee-chee) 13 forged and plated tools: Hex 2/2.5/3/4/5/6/8 + Torx 10/20/25 + PH2/Flat + DiscPadSpreader. - 8mm adapter connects to the 5mm hex for optimal use of space. - Stainless steel pivot hardware - 98 grams

Seat Capsule Premio is our BOA-powered saddlebag option for those that prefer more structure and internal volume than what a seat roll has to offer. A high-strength thermoformed shell creates a modular structure with two internal dividers that help keep everything organized. The capsule is secured to the bike using the BOA Closure System, and features a Rail Guard for superior grip and protection of the saddle rails. The zipper is a YKK locking model that bisects the lower third of the bag. Our designer chose this low position to make it easier to access the bag while it's still attached to the saddle; a key difference between a seat bag and a seat roll. - High strength Thermoformed shell - Boa Closure System with Guide - Rail Guard protects and grips saddle rails - YKK Locking Zipper - NO Velcro to damage your seat post or inner short legs - 625cc Internal Volume

SHIMANO DEORE - 126 links for HG 12-SPEED - MTB Chain The M6100 chain provides smooth shifting and enhanced chain retention thanks to an extended portion of the inner plate. The new chain features QUICK-LINK assembly and is optimized for HYPERGLIDE+ cassettes and DYNAMIC CHAIN ENGAGEMENT+ chainrings. - Proprietary design ensures smooth shifting and strength - Extended inner plate improves chain engagement and retention - Shorter shift times and less pedaling shock - Optimized to work with HYPERGLIDE+ cassette sprockets and DYNAMIC CHAIN ENGAGEMENT+ chainrings

These versatile pedals feature adjustable Shimano SPD bindings on one side and standard cages on the other: the perfect combination for riders who ride with cleated cycling shoes and also with regular shoes. With sealed bearings and chromoly axles, the M324s are durable and practical all-around pedals. - Weight: 533 grams (pair)

The Shimano Deore XT CN-M8100 12-speed chain is optimized for use with the Deore XT M8100 MTB drivetrain system. - HYPERGLIDE+ technology dedicated chain delivers greater chain retention, improved shifting efficiency, and smoother transmission over rough terrain - Extended inner plate improves chain engagement - Reduced shift times and pedaling shock - Includes Non-reusable Shimano Quick-Link (SM-CN910-12) - Links (links): 126 - Color: Silver - Drivetrain Speeds: 12 - Weight: 252 g

USM-600 E-Lume 600 Lumen Headlight - All-In-One Design - Extruded Aluminum Body - Press and Hold Button Lock - Daytime Flash Mode - Up To 90 Hours Runtime - Integrated USB Rechargeable Li-Ion Battery - Backlit Button Indicates Charge Status and Low Battery - Handlebar Bracket - USB Charging Cable UTM-60 Cosmo 60 Lumen Tail Light - 270 Degree High Visibility Design - Highly Adjustable Mounting System - Daytime Flash Mode - 5 Modes: 2 Solid / 3 Flash - Micro USB Rechargeable

The day-in, day-out Eagle ecosystem hero is now available with AXS. The GX AXS upgrade kit is your entry point into wireless drivetrain simplicity. Compatible with any of our Eagle ecosystem cassettes and crank arms, the upgrade kit allows you to experience AXS without needing to buy an entire groupset—provided you already are using Eagle products. No matter if you are looking to upgrade your ride or looking for great value replacement parts, look no further than the GX AXS upgrade kit. - Includes the SRAM GX Eagle AXS rear derailleur with battery, Eagle controller with clamp, charger with cord, and chain gap tool - The GX Eagle AXS rear derailleur shifts on command, whether under climbing load or sprinting to the stage finish, and is smart enough to protect itself thanks to its incredibly resilient Overload Clutch - Rear derailleur is compatible with 10-50t and 10-52t cassettes - The GX Eagle AXS controller offers a unique wireless shifting experience with ergonomic touchpoints that are customizable to your preferences. You can choose what each button does through the AXS App

The chain is the heart of the Eagle 1x12 drivetrain, ensuring quiet operation, long life and precise shifting. It features the same link geometry as XX1 Eagle, with solid pins and a more modest finish treatment. - Not for use with front derailleur drivetrains - Links (links): 126 - Drivetrain Speeds: 12 - Chain Connection Type: Single Use Master Link - Half Link Chain: No - Weight: 260 - Compatibility: All levels of Eagle drivetrain systems

The Flattop technology of the SRAM Rival chain creates a lighter, quieter, stronger chain that's compatible with 12-speed 1x and 2x eTap AXS drivetrains. Ride far, long, and fast. This chain can go the distance. - Flattop technology allows for a narrower chain with quieter operation and increased strength and durability - Use for both 1x and 2x eTap AXS - Includes Flattop PowerLock

On any surface you can imagine, in any drivetrain configuration, the Rival eTap AXS rear derailleur will handle it. Secure chain management and fast, precise shifting make for a smooth and quiet ride, every time. - Wireless electronic eTap shift logic for intuitive shifting, easy setup, and reliability - Compatible with both 1x and 2x drivetrains - 36T cog max derailleur works with 10-28T, 10-30T, 10-33T, and 10-36T cassettes - SRAM AXS-enabled, allowing easy personalization - Spring clutch keeps the drivetrain quiet and secure - X-SYNC pulleys for increased durability and efficiency - 36T max rear cog - Battery Not Included

X01 Eagle is the drivetrain for riders and racers who push for the purpose of gaining elevation. Whether having fun, progressing skills, or taking the win, X01 Eagle is designed and refined to support riders with the power of expanded capability. Includes: - Rear Derailleur with Battery and Battery Protector - Rocker Paddle Controller with Clamp - Charger/Cord - Chain Gap Tool

The XG-1295 cassette carries with it the X-DOME architecture, which, independent tests have concluded, yields the strongest cassettes on the market. Shifting characteristics improve both inboard and outboard shifting as well as chain retention. - SRAM’s cassette manufacturing technology provides the greatest durability and lightest weight - All-new shifting features create a smoother, quieter system with enhanced inboard and outboard shift performance - XD driver body compatible Cogs - 10 – 50T: 10, 12, 14, 16, 18, 21, 24, 28, 32, 36, 42, 50 - 10 – 52T: 10, 12, 14, 16, 18, 21, 24, 28, 32, 36, 42, 52

Make that daily ride from your front door a little spicier with some dirt. The 440% range of the XPLR XG-1251 cassette provides smooth gear progression when you're sweating up gravel climbs, and tight jumps on the high end for when it's time to drill it on asphalt. Shift features on each cog are optimized for electronic shifting, so you'll get fast, smooth and precise shifts every time. - X-Range gearing gives you more range and a smoother gear progression, so you're always in the right gear - 440% range gives the coverage 1x gravel riders want - For use with XPLR 1x rear derailleurs - Compatible with Flattop chains - Compatible with XDR driver body - MINI CLUSTER technology for lightweight and durability SPECIFICATIONS: - SPEED (CS): 12s - GEARING: 10-44t - COG FINISH (CASSETTE): Nickle Chrome - TECHNOLOGY (CASSETTE): XG - COG SIZES: 10-44T: 10,11,13,15,17,19,21,24,28,32,38,44

SRAM eTap Battery is the power source for the eTap system. The same power unit is interchangeable between front and rear derailleurs. - Up to 1000 kilometers of riding per charge - Weight: 24g - Finish: Black - Compatibility: SRAM RED eTap

Feel your bike come alive on the open road with the new Alpinist CL II, featuring the lightest, best-handling clincher rims we have ever made, elevated with the performance of a tubeless system. The brand new Alpinist CL II now brings mountain-taming performance slightly closer to earth with a carefully selected build designed to let riders take full advantage of the low rim and spoke mass. The Alpinist CL II utilizes the same rim as the alpinist clx ii. They react to even the slightest increase in power with immediate acceleration and carve the purest lines in the corners, yet they can also handle almost double the impact standards of every certifying body. The result is a 1375-gram tubeless wheelset with an otherworldly ride quality designed for real-world road pressures. The Alpinist CL II utilizes components curated to keep you rolling and rolling fast. The DT Swiss 350 hubs, featuring their star ratchet drive system, are reliable and easy to service, while 24 DT Swiss comprace straight-pull spokes front and rear, laced to the rims with their alloy pro lock nipples, are synonymous with reliability and can be obtained at any bike shop. The reduced rolling resistance of a tubeless setup is undeniable, as are the benefits of improved handling and incredible puncture protection. It took the most extensive and demanding engineering and testing program we've ever undertaken. As a result of this extensive development, the Alpinist CL II features a hooked rim that can handle a huge range of pressures up to 110psi and offers an easier set up and mounting experience than ever. - Rim: Alpinist CLX Carbon Clincher, 700c, Disc Brake, Tubeless - Rim Details: 33mm Depth, 27mm External Width, 21mm Internal Width - Hub: DT Swiss 350 Straightpull Center Lock, Star Ratchet 36t internals (10 degs), 100x12mm & 142x12mm, Shim. RD. 11SP HG freehub - Bearing Type: DT Swiss Sealed Steel Cartridge Bearings - Spokes: DT Swiss Competition Race Straightpull, Front: Radial/Two-cross (2:1) 21 count, DS: 276mm, NDS: 290mm; Rear: Two-cross (1:1) 24 count, DS: 283mm NDS: 287mm - Nipple: DT Swiss Hex Prolock Al 2.0x14mm - Tire Size: 24mm—38mm; Max Pressure: 24mm-35mm: Tubeless (110psi) Tubed (130psi), 36mm-38mm: Tubeless (60psi) Tubed (60psi) - Weight: Wheelset 1,375g, Front 606g, Rear 769g (including 15g, tubeless rim tape and tubeless valve) - Assembly Method: Hand built at every step; from rim layup to the last nipple turn. - Extras: Roval Rim Tape, Spare Spoke & Nipple Kit, System Weight Limit: 275lbs/125kg

Feel your bike come alive on the open road with the new Alpinist CL II, featuring the lightest, best-handling clincher rims we have ever made, elevated with the performance of a tubeless system. The brand new Alpinist CL II now brings mountain-taming performance slightly closer to earth with a carefully selected build designed to let riders take full advantage of the low rim and spoke mass. The Alpinist CL II utilizes the same rim as the alpinist clx ii. They react to even the slightest increase in power with immediate acceleration and carve the purest lines in the corners, yet they can also handle almost double the impact standards of every certifying body. The result is a 1375-gram tubeless wheelset with an otherworldly ride quality designed for real-world road pressures. The Alpinist CL II utilizes components curated to keep you rolling and rolling fast. The DT Swiss 350 hubs, featuring their star ratchet drive system, are reliable and easy to service, while 24 DT Swiss comprace straight-pull spokes front and rear, laced to the rims with their alloy pro lock nipples, are synonymous with reliability and can be obtained at any bike shop. The reduced rolling resistance of a tubeless setup is undeniable, as are the benefits of improved handling and incredible puncture protection. It took the most extensive and demanding engineering and testing program we've ever undertaken. As a result of this extensive development, the Alpinist CL II features a hooked rim that can handle a huge range of pressures up to 110psi and offers an easier set up and mounting experience than ever. - Rim: Alpinist CLX Carbon Clincher, 700c, Disc Brake, Tubeless - Rim Details: 33mm Depth, 27mm External Width, 21mm Internal Width - Hub: DT Swiss 350 Straightpull Center Lock, Star Ratchet 36t internals (10 degs), 100x12mm & 142x12mm, Shim. RD. 11SP HG freehub - Bearing Type: DT Swiss Sealed Steel Cartridge Bearings - Spokes: DT Swiss Competition Race Straightpull, Front: Radial/Two-cross (2:1) 21 count, DS: 276mm, NDS: 290mm; Rear: Two-cross (1:1) 24 count, DS: 283mm NDS: 287mm - Nipple: DT Swiss Hex Prolock Al 2.0x14mm - Tire Size: 24mm—38mm; Max Pressure: 24mm-35mm: Tubeless (110psi) Tubed (130psi), 36mm-38mm: Tubeless (60psi) Tubed (60psi) - Weight: Wheelset 1,375g, Front 606g, Rear 769g (including 15g, tubeless rim tape and tubeless valve) - Assembly Method: Hand built at every step; from rim layup to the last nipple turn. - Extras: Roval Rim Tape, Spare Spoke & Nipple Kit, System Weight Limit: 275lbs/125kg

Mass is the enemy of performance, so we pulled out all the stops to make the Alpinist Seatpost the lightest post we've ever seen that passes our standards. At 136 grams (27.2mm x 300mm), it's about as light as you'll find. Not only does light weight make for faster climbing, it also improves acceleration and ride quality. The Alpinist 2-bolt micro-adjust clamp with extended saddle cradle ensures precision fit and secure retention. Available in two sizes, 27.2mm x 300mm and 27.2mm x 360mm, each with a 12mm setback. And because they are backed by a no-fault crash replacement policy and lifetime warranty, you can rest easy knowing that we've got your back. - 136 grams (27.2mm x 300mm), - 2-bolt micro-adjust clamp with 46mm saddle rail cradle enables an effective offset from 0mm to 20mm. - Advanced composite construction delivers light weight and reliability. - Available in two sizes: 27.2mm x 300mm x 12mm offset, 27.2mm x 380mm x 12mm offset - No-Fault crash replacement policy. Lifetime warranty - System Weight Limit: 275lbs / 125kg

The Terra seatpost is the best choice for riding mixed terrain, gravel, or rough roads because it smooths the ride by allowing significant vertical compliance. The secret to this ride smoothing post is in the composite layup that we utilized. By utilizing composites with varying elongation characteristics at specific locations in the post, we enabled vertical compliance for comfort while retaining requisite strength for mixed terrain riding, all at a sub-200 gram weight (27.2 x 330 x 0). - 18mm Vertical Compliance (20mm offset / Full Extension) - 194 grams (27.2 x 330mm x 0) - Advanced composite construction delivers ride-smoothing vertical compliance. - Available in four sizes: 27.2mm x 330mm x 0 offset, 27.2mm x 380mm x 0 offset, 27.2mm x 330mm x 20mm offset, 27.2mm x 380mm x 20mm offset - No-Fault crash replacement policy. Lifetime warranty - Proven clamp design ensures ease of adjustment and slip-free performance. - System Weight Limit: 275lbs / 125kg

Taking the notion of combining flagship performance with workhorse dependability one step further, we're introducing the Terra C. This shares the same hub and spoke architecture as the Terra CL, ensuring ease of service and spoke replacement, should the need arise and is paired with an entirely new rim layup. The rims on the Terra C share the same dimensions and broad range of tire mounting possibilities as the Terra CLX and CL—33mm deep with a 25mm internal width—but are crafted using a new-to-us process known as Resin Transfer Molding. This is an automated process that allows us to very precisely control how resin is introduced to the layup, which in turn ensures maximum strength and material performance. The end result is an incredibly tough set of wheels that you can beat on to hell and back. - Rim: Terra C RTM Carbon Clincher, 700c, Disc Brake, Tubeless Compatible - Rim Details: 32mm Depth, 30mm External Width, 25mm Internal Width; ERD 577mm - Hub: DT Swiss 370 J-bend Center Lock, Ratchet LN 18t internals (20 degs), 100x12mm & 142x12mm, Shim. Rd. 11sp Freehub (Convertible freehub ) - Bearing Type: DT Swiss Sealed Steel Cartridge Bearings - Spokes: DT Swiss Competition Race J-bend, Front: Radial/Two-cross 24 count, R: 268mm, L: 279mm; Rear: Two-cross 24 count, DS: 277mm NDS: 278mm - Nipple: DT Swiss Hex Prolock Al 2.0x14mm - Tire Size: 28mm - 47mm; Max Pressure: 28c-32c: 80psi, 33c – 36c: 65psi, 37c- 47c: 60psi - Weight: Wheelset 1,610g, Front 719g, Rear 891g (including tubeless rim tape and tubeless valve) - Assembly Method: Carbon Layup - Automated, Wheel Build - Hand built. - Extras: Roval Tubeless Rim Tape and Tubeless Valve, Spare Spoke & Nipple Kit - System Weight Limit: 275lbs / 125kg

Trail wheels often fall into two categories—they're either heavy and durable or light and flexy. And because of this, a lightweight, wide-profile, and enduro-ready carbon wheel seems like something only found in a fairytale, but lucky for you, we made it a reality. The Traverse SL Fattie 29 puts all the features you need in an all-mountain wheel into one package, and it has the results to prove it. Along with light overall weight, stiffness, and durability, another top priority for the Traverse SL was ease of use. First off, we got rid of the creaky straight-pull spokes and corrosion-prone alloy nipples. Next up, we landed on 28 J-bend spokes, for both the front and rear wheels, that are all the same length—making it easy to find replacements if needed. And finally, we engineered a new hub design, with a wider profile and higher flange to aid in overall stiffness. What's with the big-boned name, you ask? The Traverse SL Fatties may be wide, but with a 30mm inner rim width, they're far from the girth of a fat bike rim. But let's talk width. You've probably noticed that mountain bike rim widths have hovered between 19 and 23 millimeters for decades, and they've been long overdue for a change. In the search for a better wheel design, our engineers began testing 2.3- to 2.5-inch tires on 45-millimeter-wide fat bike rims to see what, if any, benefits could be found. It only took them a few rides to realize that the wider rims offered a variety of advantages, like adding additional tire volume, which better supports the tires in hard cornering, greatly improves traction because of the ability to run lower pressures, and noticeably increases rim stiffness. They did note that there is an occurrence of diminishing returns with increasing width, however, and after testing everything from 25 to 45mm, determined that a 30mm inner width is optimal. After determining the width, we began designing the rim using the knowledge that we gained when developing the Control SL. With this, we started with our Zero Bead Hook technology that gets rid of the weak spot found in a traditional wheel and combined it with the wider profile to make a carbon rim that effectively dissipates forces. This way, you can take abuse from rocks without the worry of cracks or dents. Ok, so they're strong, impact-resistant, and tire supporting-they must be heavy, right? Wrong. Even though "fattie" is in their name, they're far from fat. To achieve this weight, we hand-build our rims to our own alloy hubs, using only the highest quality DT Swiss Competition Race spokes. Inside our hubs, you'll find DT Swiss 240 internals with a quick engaging 54t DT Swiss star ratchet system in the rear that allows you to power over rocks and roots without delay. And while machines do a pretty good job of building wheels, we choose professionally trained humans because they do so with an artistic touch that makes for minimal flaws. Whether you need a carbon wheelset to get you through an enduro stage or one to shred your local rock garden, the Traverse SL Fattie has you covered. - Assembly Method: Hand-built - Bearing Type: Sealed cartridge - Every wheel includes tubeless valve stems in order to make tubeless set-up a touch easier. - Front Hub: Alloy body, 15mmx110 thru-axle, 19 and 31mm OD end cap options included. - Front Spoke Pattern: Two-cross - Nipple Type: DT Swiss Brass Pro Lock hexagonal - Rim Material: Carbon fiber - Rim Type: Carbon clincher, 2Bliss Ready, Zero Bead Hook design. Black graphic under clear coat. - Rim Width: 30mm internal - Roval Engineered J-bend hubshells have a single spoke length for each wheelset. - Spoke Count: 28h Front - Spoke Type: DT Swiss Competition Race J-bend

Trail wheels often fall into two categories—they're either heavy and durable or light and flexy. And because of this, a lightweight, wide-profile, and enduro-ready carbon wheel seems like something only found in a fairytale, but lucky for you, we made it a reality. The Traverse SL Fattie 29 puts all the features you need in an all-mountain wheel into one package, and it has the results to prove it. Along with light overall weight, stiffness, and durability, another top priority for the Traverse SL was ease of use. First off, we got rid of the creaky straight-pull spokes and corrosion-prone alloy nipples. Next up, we landed on 28 J-bend spokes, for both the front and rear wheels, that are all the same length—making it easy to find replacements if needed. And finally, we engineered a new hub design, with a wider profile and higher flange to aid in overall stiffness. What's with the big-boned name, you ask? The Traverse SL Fatties may be wide, but with a 30mm inner rim width, they're far from the girth of a fat bike rim. But let's talk width. You've probably noticed that mountain bike rim widths have hovered between 19 and 23 millimeters for decades, and they've been long overdue for a change. In the search for a better wheel design, our engineers began testing 2.3- to 2.5-inch tires on 45-millimeter-wide fat bike rims to see what, if any, benefits could be found. It only took them a few rides to realize that the wider rims offered a variety of advantages, like adding additional tire volume, which better supports the tires in hard cornering, greatly improves traction because of the ability to run lower pressures, and noticeably increases rim stiffness. They did note that there is an occurrence of diminishing returns with increasing width, however, and after testing everything from 25 to 45mm, determined that a 30mm inner width is optimal. After determining the width, we began designing the rim using the knowledge that we gained when developing the Control SL. With this, we started with our Zero Bead Hook technology that gets rid of the weak spot found in a traditional wheel and combined it with the wider profile to make a carbon rim that effectively dissipates forces. This way, you can take abuse from rocks without the worry of cracks or dents. Ok, so they're strong, impact-resistant, and tire supporting-they must be heavy, right? Wrong. Even though "fattie"? is in their name, they're far from fat. To achieve this weight, we hand-build our rims to our own alloy hubs, using only the highest quality DT Swiss Competition Race spokes. Inside our hubs, you'll find DT Swiss 240 internals with a quick engaging 54t DT Swiss star ratchet system in the rear that allows you to power over rocks and roots without delay. And while machines do a pretty good job of building wheels, we choose professionally trained humans because they do so with an artistic touch that makes for minimal flaws. Whether you need a carbon wheelset to get you through an enduro stage or one to shred your local rock garden, the Traverse SL Fattie has you covered. - Assembly Method: Hand-built - Bearing Type: Sealed cartridge - Every wheel includes tubeless valve stems in order to make tubeless set-up a touch easier. - Nipple Type: DT Swiss Brass Pro Lock hexagonal - Rear Hub: CNC-machined alloy body, high-quality DT 240 internals, and 54t quick engagement ratchet system cassette, includes SRAM XX1 11-speed freehub and 148 end caps. - Rear Spoke Pattern: Two-cross - Rim Material: Carbon fiber - Rim Type: Carbon clincher, 2Bliss Ready, Zero Bead Hook design. Black graphic under clear coat. - Rim Width: 30mm internal - Roval Engineered J-bend hubshells have a single spoke length for each wheelset. - Spoke Count: 28h Rear - Spoke Type: DT Swiss Competition Race J-bend

Our intention with Reverb AXS was inventive and pure: No hoses. No routing. No energy wasted. Not a single thing in the way of the experience. We created a reliable wireless-electronic dropper post and controller that actuates with drastically less effort and zero distraction. Expanding what's possible on a bike, Reverb AXS is enabled by SRAM AXS technology, a new level of interaction, personalization, and connectivity across all AXS-enabled components. - Effortless Electronic-Wireless actuation and infinite height adjustment with a single touch. - Clean, simple and fast to install. No hoses to route, no fishing required. - Updated internals for faster return speed in all conditions. - New Vent Valve Technology, a simple and reliable built in service solution without disassembly of the seatpost. - SRAM AXS technology, a new level of interaction, personalization, and connectivity across all AXS-enabled components. - Includes RockShox AXS handlebar controller, rechargeable SRAM battery, and charger.

- This lightweight and fast tire is crafted to pack the key benefits of tubeless technology into a race-day product, emphasizing speed and handling and exceeding the performance of any other Pirelli bicycle tire in this class, TT and lightweight tubulars included, without compromising on puncture protection thanks to the TechWALL casing technology. - After three years of development working with the fastest racers at the World Tour level, Pirelli designed this new tubeless-ready tire with the new SmartEVO compound to provide our Professional riders as well as all cycling enthusiasts, with our best bicycle racing tire to date! - Techwall Road: New TLR casing technology with an added layer of reinforcement to provide superior puncture protection in a lighter structure - 28c width is compatible with hookless rims according to ETRTO 5bar/73psi max pressure limitations. 24c and 26c width are NOT compatible with hookless rims.

- Lightest and most versatile MTB mudguard available - Uses hook and loop Velcro straps to attach to the bridge and lower legs - Compatible with forward and double bridge fork designs and all wheel sizes - XL version is longer and provides more coverage

The Sport Mechanic Bike Repair Stand prioritizes the most critical aspects of the entire Feedback Sports bike repair stand lineup – compatibility, stability, durability and portability. The 360-degree rotating clamp uses a spinner knob closure that can accommodate up to 1.9? (4.8cm) and support 65lbs (29.5kg). Plus, the Sport Mechanic leverages the same 54? (137cm) wide base, with rubber-coated end caps, for amazing stability on any surface. And when the service day is done, it folds in to a compact unit for storage or travel. Add an available Travel Bag and a Tool Tray for the optimal bike maintenance setup.

At nearly 20% lighter than our (already) lightweight stand collection, the Ultralight takes no performance shortcuts to achieve its feathery 10.6lb (4.8kg) total weight. Despite a slender scale reading it still possess the same durability and stability of our other stands. With the 360° rotating Slide-Lock clamp and a 54? (137cm) wide base with rubber-coated end caps, confidence in the security of your bike is never in question. And when the service day is done, it folds in to a space-saving unit for storage or travel. Look to our Tool Tray and Pro Truing Station upgrades to create the optimal home bike maintenance setup.

- Hook & loop attachment straps - Structured sides and bottom - Reflective piping - Small: 24 x 5 x 11cm - Medium: 37 x 4.5 x 13cm

The Elite Smart Sterzo riser block allows steering up to 34 deg while riding your rear wheel trainer while using ANT and Bluetooth communication protocol, interacts with compatible apps to give you the most realistic indoor ride. It’s rotating pivot features a practical automatic return system for you to easily get the handlebar back to its original position. Compatible with tires up to 56mm wide

DEITY Circuit Seatpost Clamp. Rounded edges, minimized size offer the perfect touch of refinement and style. - DEITY Circuit Seatpost Clamp - 38.6mm, Orange

With our PolyX Breaker, we bring our car expertise to the bicycle tire segment: Polyester has been used successfully for years in car tires and been tried and tested many times. The extremely resistant polyester fiber is woven tightly crosswise. In this way, a very high fabric density is reached, which not only makes the Breaker more resistant to foreign objects but is also especially resistant to punctures. The rolling resistance is also not negatively affected by the PolyX Breaker. - The right tire when it comes to tough conditions. - The right choice for a strong performance in the urban field and on tour.

The Grand Prix 5000 is the best all-rounder in the field, brought to a whole new performance level. Ride faster, more comfortably, and with increased puncture protection. Its Active Comfort Technology absorbs vibrations and smooths your ride. Lazer Grip technology, designed to make you one with the road, features a lasered micro profile structure that expands over the tire’s shoulder and provides outstanding cornering. The Vectran Breaker is lighter, more flexible and protects more effectively against cuts than comparable nylon. With incredible tear resistance at a very low weight, it possesses exactly the right properties to be a premium puncture protection insert, while not adversely affecting rolling resistance. The Grand Prix 5000—made to make you better. With Continental's unique and legendary BlackChili tread compound, produced only in Germany, they have revolutionized the sport of cycling. This compound answers the eternal question of the best balance of grip and rolling resistance for cycling. Regular test wins confirm the measurable and noticeable advantages for cyclists, established in both the lab and on the road. The latest polymers, as well as specially developed carbon black particles and filler materials, guarantee ultimate performance.

- Uniquely formulated synthetic Halo Touch surface with prismatic texture sure to turn heads while improving grip and providing all-out performance. - Multi-layer, multi-density foam laminates effectively absorbs shock, dampens vibration and minimizes fatigue. - Highly elastic and lightweight organic adhesive will not leave residue on the handlebars to ease installation and adjustment. - Reusable, expanding locking bar plugs are reliable and resistance to falling out. - Highly elastic finishing tape does not deform, degrade of soften in extreme temperature and weather conditions.

Strong and nearly indestructible, this heavy-duty tool provides much more leverage than the weaker, more brittle tire lever. Designed to pull the tire over the rim's bead, it never protrudes into the tire thus avoiding inner tube damage that commonly occurs with tire levers. And the nylon material prevents undesired scratches from occurring to the rims attached to your beautiful wheels. This tool can be used for tires up to 46mm. Made of lightweight, durable, injection molded, fiber reinforced thermoplastic.

The sleek and ultralight BM-45 bar end mirror easily attaches to drop and flat bars, making it perfect for all bikes. Constructed of aluminum and glass for durability and nearly distortion-free viewing, the BM-45 represents the height of handlebar mirror construction and design. Minimal projection from the bar means never having to sacrifice clean aesthetics for critical rear-view safety again.

- Highly reflective colored spoke covers give your new bike that old school vibe - Perfect for cruisers, BMX, or wheelie bikes that need that little bit of extra style - Sold in bags of 36, enough for one wheel - 150mm long

- 6061 aluminum alloy frame with reinforcing gussets at critical points - Single-speed drivetrain with flip-flop rear hub - Rear alloy linear-pull brake with 2-finger lever - Three piece chromoly BMX cranks with 8-spline quad bearing BB - 29" double wall alloy rims with stainless steel spokes - 29 x 2.30" Vee Tire Co. Speedster tires - Black Ops SpecOp BMX handlebar with brace - Black Ops SpecOp custom BMX saddle with anti-slip surface - Frame Standover: 29.5" - Min Seat to Ground: 32" - Min Seat to Pedal: 28" - Bike Weight: 30.5 lbs - Rider Weight Limit: 250 lbs